Lenovo ThinkSystem SD630 V2 Server

The Lenovo ThinkSystem SD630 V2 is a dense and economical two-socket server in a 0.5U rack form factor. Combining the efficiency and density of blades with the value and simplicity of rack-based servers, the SD630 V2 delivers a cost-efficient scale-out platform that is thermally designed to deliver maximum performance in the smallest footprint. The solution consists of a 2U ThinkSystem DA240 Enclosure containing up to four front-access SD630 V2 servers (nodes). Each node incorporates two third-generation Intel Xeon Scalable processors.

The SD630 V2 is well suited for workloads ranging from cloud, analytics to AI and high performance computing application like Computer Aided Engineering (CAE) or Electronic Design Automation (EDA).

The following figure shows four ThinkSystem SD630 V2 servers installed in a DA240 Enclosure.

Figure 1. Four ThinkSystem SD630 V2 servers installed in a DA240 Enclosure

The SD630 V2 combines the efficiency and density of blades with the value and simplicity of rack-based servers. With high-performance features such as high-core-count Xeon Platinum processors and high-performance 200Gb Ethernet, HDR InfiniBand and OPA fabrics, to power through your most demanding HPC, technical computing and AI workloads.

Lenovo ThinkSystem SD630 V2 is based on our fourth generation dense server platform leveraging two 3rd Gen Intel Xeon Scalable processors with NVIDIA HDR InfiniBand networking.

The SD630 V2 is designed to provide highest air-cooled CPU performance density adhering to industry-standards like the 19-inch rack footprint or standard 42U rack heights at 2 meters. To truly support every scale, it is available starting at a single node within a single Enclosure in the rack to thousands of clustered nodes in hundreds of racks in the datacenter.

The front-accessible design optimized for best-in-class thermal capabilities provides a dense, flexible solution with a low TCO. The half-wide, dual-socket server is designed for data centers that require high performance but are constrained by floor space. By taking up less physical space in the data center, the SD630 V2 enhances density and supports the Intel Xeon Scalable Family of processors, including up to an industry-leading 250W TDP.

The ThinkSystem DA240 Enclosure is an efficient, 2U rack mount enclosure with no built-in networking or switching capabilities; therefore, it requires no enclosure-level management. Sensibly designed to provide shared, high-efficiency power and cooling for housed servers, the DA240 enclosure is designed to scale with your business needs.

Scalability and performance

The SD630 V2 server offers numerous features to boost performance, improve scalability, and reduce costs:

• Each SD630 V2 server supports two third-generation Intel Xeon Scalable Family processors, 16 TruDDR4 DIMMs and a PCIe 4.0 x16 slot for high-speed I/O, and up to two drive bays, in a half-wide 1U form factor.
• Up to 4 SD630 V2 servers are installed in the DA240 enclosure, occupying only 2U of rack space. It is a highly dense, scalable, and price-optimized offering.
• Supports two third-generation Intel Xeon Processor Scalable processors
  • Up to 38 cores and 76 threads
  • Core speeds of up to 3.6 GHz
  • TDP ratings of up to 270W
• The next generation of Lenovo Neptune™ Thermal Transfer Module enables market leading TDP support within the dense form factor.
• Support for up to 16 TruDDR4 memory DIMMs operating at up to 3200 MHz means you have the fastest available memory subsystem.
• Each processor supports 8 DIMMs, each with its own memory channel.
• Using 128GB RDIMMs, the server supports up to 2TB of system memory.
• Each SD630 V2 server supports either two 7mm hot-swap SSDs or a single 2.5-inch hot-swap SSD. Drives can be either SATA or high-performance NVMe drives, to maximize I/O performance in terms of throughput, bandwidth, and latency.
• Supports two M.2 drives installed in an adapter for convenient operating system boot functions.
• The use of solid-state drives (SSDs) instead of traditional hard disk drives (HDDs) can improve I/O performance. An SSD can support up to 100 times more I/O read operations per second (IOPS) than a typical HDD.
• The server includes onboard Gigabit and 25 Gb Ethernet ports for cost effective networking. The server also includes a PCIe slot for additional high-speed networking.
• One PCIe 4.0 x16 is standard. For special bid orders, the drive bays can be converted to a second PCIe 4.0 x16 slot for added I/O flexibility.
• The server offers PCI Express 4.0 I/O expansion capabilities that doubles the theoretical maximum bandwidth of PCIe 3.0 (16GT/s in each direction for PCIe 4.0, compared to 8 GT/s with PCIe 3.0). A PCIe 4.0 x16 slot provides 64 GB/s bandwidth, enough to support a 200GbE network connection.

Manageability and security

Powerful systems management features simplify local and remote management of the SD630 V2:

• The server includes an XClarity Controller (XCC) to monitor server availability. Optional upgrade to XCC Advanced to provide remote control (keyboard video mouse) functions. Optional upgrade to XCC Enterprise enables the additional support for the mounting of remote media files (ISO and IMG image files), boot capture, and power capping.
• Lenovo XClarity Administrator offers comprehensive hardware management tools that help to increase uptime, reduce costs and improve productivity through advanced server management capabilities.
• Lenovo XClarity Provisioning Manager, based in UEFI and accessible from F1 during boot, provides system inventory information, graphical UEFI Setup, platform update function, RAID Setup wizard, operating system installation function, and diagnostic functions.
• Support for Lenovo XClarity Energy Manager which captures real-time power and temperature data from the server and provides automated controls to lower energy costs.
• Support for industry standard management protocols, IPMI 2.0, SNMP 3.0, Redfish REST API, serial console via IPMI
• Supports Lenovo Intelligent Computing Orchestration (LiCO), a powerful platform that manages cluster resources for HPC and AI applications. LiCO supports multiple AI frameworks, including TensorFlow, Caffe, Neon, and MXNet, allowing you to leverage a single cluster for diverse workload requirements.
• Integrated Trusted Platform Module (TPM) 2.0 support enables advanced cryptographic functionality, such as digital signatures and remote attestation.
• Supports Secure Boot to ensure only a digitally signed operating system can be used. Supported with SSDs and M.2 drives.
• Industry-standard Advanced Encryption Standard (AES) NI support for faster, stronger encryption.
• Intel Execute Disable Bit functionality can prevent certain classes of malicious buffer overflow attacks when combined with a supported operating system.
• Intel Trusted Execution Technology provides enhanced security through hardware-based resistance to malicious software attacks, allowing an application to run in its own isolated space, protected from all other software running on a system.
• With the SMM management module installed in the enclosure, only one Ethernet connection is needed to provide remote systems management functions for all four SD630 V2 servers and the enclosure.
• The SMM management module has two Ethernet ports which allows a single Ethernet connection to be daisy chained across 7 enclosures and 28 servers, thereby significantly reducing the number of Ethernet switch ports needed to manage an entire rack of SD630 V2 servers and enclosures.

Energy efficiency

The SD630 V2 and the DA240 enclosure offer the following energy efficiency features to save energy, reduce operational costs, increase energy availability, and contribute to a green environment:

• ASHRAE A2 compliance for certain configurations to enable operation in 35°C datacenters
• Energy-efficient planar components help lower operational costs.
• High-efficiency power supplies with 80 PLUS Platinum certifications.
• Next Generation Lenovo Neptune^TM Thermal Transfer Module for efficient aircooling of the CPUs.
• Intel Intelligent Power Capability powers individual processor elements on and off as needed to reduce power draw.
• SSDs use as much as 80% less power than 2.5-inch HDDs.
• Optional Lenovo XClarity Energy Manager provide advanced data center power notification, analysis, and policy-based management to help achieve lower heat output and reduced cooling needs.
• Lenovo power/energy meter based on TI INA226 measures DC power both for the CPU as well as the GPU board at higher than 97% accuracy and 100 Hz sampling frequency to the XCC and can be leveraged both in-band and out-of-band using IPMI raw commands.
• Optional Energy Aware Runtime provides sophisticated power monitoring and energy optimization on a job-level during the application runtime without impacting performance negatively.

Availability and serviceability

The SD630 V2 server and the DA240 enclosure provide many features to simplify serviceability and increase system uptime:

• Designed to run 24 hours a day, 7 days a week
• The server offers Single Device Data Correction (SDDC, also known as Chipkill), Adaptive Double-Device Data Correction (ADDDC, also known as Redundant Bit Steering or RBS) and memory mirroring for redundancy in the event of a non-correctable memory failure.
• The server offers hot-swap drives, supporting RAID redundancy for data protection and greater system uptime.
• The Dual M.2 Boot Adapter supports RAID-1 which enables two installed M.2 drives to be configured as a redundant pair.
• The DA240 Enclosure supports two hot-swap power supplies, which form a redundant pair to provide availability for business-critical applications.
• Toolless access to upgrades and serviceable parts, such as fans, adapters, CPUs, and memory.
• Proactive Platform Alerts (including PFA and SMART alerts): Processors, voltage regulators, memory, internal storage (SAS/SATA HDDs and SSDs), fans, power supplies, RAID controllers, and server ambient and sub-component temperatures. Alerts can be surfaced through the XClarity Controller (XCC) to managers such as Lenovo XClarity Administrator, VMware vCenter, and Microsoft System Center. These proactive alerts let you take appropriate actions in advance of possible failure, thereby increasing server uptime and application availability.
• SSDs offer significantly better reliability than traditional mechanical HDDs for greater uptime.
• The built-in XClarity Controller continuously monitors system parameters, triggers alerts, and performs recovery actions in case of failures to minimize downtime.
• Built-in diagnostics in UEFI, using Lenovo XClarity Provisioning Manager, speed up troubleshooting tasks to reduce service time.
• Lenovo XClarity Provisioning Manager supports diagnostics and can save service data to a USB key drive or remote CIFS share folder for troubleshooting and reduce service time.
• Auto restart in the event of a momentary loss of AC power (based on power policy setting in the XClarity Controller service processor)
• Support for the XClarity Administrator Mobile app running on a supported smartphone or tablet and connected to the server through the service-enabled USB port, enables additional local systems management functions.
• Three-year customer-replaceable unit and onsite limited warranty, 9 x 5 next business day. Optional service upgrades are available.

The following figure shows the architectural block diagram of the SD630 V2, showing the major components and their connections.

Figure 6. SD630 V2 system architectural block diagram

The following table lists the standard specifications of the SD630 V2.

The SD630 V2 servers are supported in the ThinkSystem DA240 Enclosure. The following table lists the standard specifications of the enclosure.

ThinkSystem SD630 V2 models can be configured by using the Lenovo Data Center Solution Configurator (DCSC).

Configure-to-order (CTO) models are used to create models with factory-integrated server customizations. For CTO models, two base CTO models are available for the SD630 V2 as listed in the following table, CTO1WW and CTOLWW:

• The CTO1WW base CTO model is for general business and is selectable by choosing General Purpose mode in DCSC.
• The CTOLWW base model is intended for High Performance Computing (HPC) and Artificial Intelligence (AI) configurations and solutions, including configurations for Lenovo Scalable Infrastructure (LeSI), and is enabled using either the HPC & AI LeSI Solutions mode or HPC & AI Hardware mode in DCSC. CTOLWW configurations can also be built using System x and Cluster Solutions Configurator (x-config).

Preconfigured server models may also be available for the SD630 V2, however these are region-specific; that is, each region may define their own server models, and not all server models are available in every region.

The following table lists the base CTO models of the ThinkSystem SD630 V2 server.

The following table lists the base choices for CTO configurations of the SD630 V2.

Up to four SD630 V2 servers are supported in a DA240 enclosure.

The following table lists the base CTO models of the ThinkSystem SD630 V2 server.

The following table lists the base choices for CTO configurations of the DA240 enclosure.

The SD630 V2 supports processors in the third-generation Intel Xeon Scalable Processor family. The server supports two processors. A configuration of a single processor is not supported.

Topics in this section:

• Processor options
• Processor features
• Thermal restrictions by processor
• UEFI operating modes

• 64x PCIe 4.0 I/O lanes available for PCIe and NVMe devices
• 1.25 MB L2 cache per core
• 1.5 MB or more L3 cache per core
• Intel Deep Learning Boost, which provides built-in Artificial Intelligence (AI) acceleration with the Vector Neural Network Instruction set (VNNI). DL Boost and VNNI are designed to deliver significant, more efficient Deep Learning (Inference) acceleration for high-performance AI workloads.
• Intel Hyper-Threading Technology, which boosts performance for multithreaded applications by enabling simultaneous multithreading within each processor core, up to two threads per core.
• Intel Turbo Boost Technology 2.0, which allows processor cores to run at maximum speeds during peak workloads by temporarily going beyond processor TDP.
• Intel Virtualization Technology (includes VT-x and VT-d), which integrates hardware-level virtualization hooks that allow operating system vendors to better use the hardware for virtualization workloads.
• Intel Speed Select Technology, supported on some processor models, enables increased core Turbo Boost frequency on specific individual cores to maximize application performance.
• Intel Advanced Vector Extensions 512 (AVX-512), to enable acceleration of enterprise-class workloads, including databases and enterprise resource planning (ERP).
• Up to two Intel AVX-512 Fused-Multiply Add (FMA) units
• Intel SGX (Software Guard Extensions) and Intel TME (Total Memory Encryption) security features
• Two or three Intel Ultra Path Interconnect (UPI) links at up to 11.2 GT/s, to maximize inter-processor communication

The following table compares the features of the supported third-generation Intel Xeon processors.

* L3 cache is 1.5 MB per core or larger. Processors with a larger L3 cache per core are marked with an *

Thermal restrictions by processor

Processors used in the SD630 V2 have the following thermal restrictions:

• When operating above 30°C ambient temperature there may be performance impacts at high utilization for
  • Processors with TDP of 165 watts or lower  
• When operating above 25°C ambient temperature there may be performance impacts at high utilization for
  • Processors with TDP of higher than 165 watts
  • Intel Xeon Gold 6334 8C 165W 3.5GHz Processor

The following table lists the feature codes that allow you to specify the mode you wish to preset in the factory for CTO orders.

The preset modes for the SD630 V2 are as follows:

• Maximum Performance Mode (feature BFYB): Achieves maximum performance but with higher power consumption and lower energy efficiency.
• Minimal Power Mode (feature BFYC): Minimize the absolute power consumption of the system.
• Efficiency Favoring Power Savings Mode (feature BFYD): Maximize the performance/watt efficiency with a bias towards power savings. It is expected that will be the favored mode for SPECpower benchmark testing for example.
• Efficiency Favoring Performance Mode (feature BFYE): Maximize the performance/watt efficiency with a bias towards performance. It is the favored mode for Energy Star certification for example.

The SD630 V2 uses Lenovo TruDDR4 memory and supports 8 DIMMs per processor or 16 DIMMs with two processors installed. Each processor has eight memory channels with one DIMM per channel. With 128 GB 3DS RDIMMs installed, the SD630 V2 supports a total of 2 TB of system memory.

Memory operates at up to 3200 MHz, depending on the memory DIMMs and processor model selected. If the processor selected has a lower memory bus speed, then all DIMMs will operate at that lower speed.

The following table lists the memory options that are available for the server.

Lenovo TruDDR4 memory uses the highest quality components that are sourced from Tier 1 DRAM suppliers and only memory that meets the strict requirements of Lenovo is selected. It is compatibility tested and tuned to maximize performance and reliability. From a service and support standpoint, Lenovo TruDDR4 memory automatically assumes the system warranty, and Lenovo provides service and support worldwide.

For best performance, consider the following:

• Populate memory DIMMs in quantities of 8 per processor, so that all memory channels are used.
• Populate memory channels so they all have the same total memory capacity.
• Ensure all memory controllers on a processor socket have the same DIMM configuration.
• All processor sockets on the same physical server should have the same DIMM configuration.

Note: Memory sparing is not supported

If memory channel mirroring is used, then DIMMs must be installed in pairs or sets of three (minimum of one pair or set of three per processor), and all DIMMs in the pair or set of three must be identical in type and size. 50% of the installed capacity is available to the operating system. Memory rank sparing is not supported.

The SD630 V2 supports one or two hot-swap drive bays, accessible from the front of the server. The server supports either:

• 2x 7mm hot-swap SSDs, either SATA or NVMe
• 1x 2.5-inch hot-swap SSDs, NVMe

The following figure shows the drive bay choices.

Figure 7. SD630 V2 drive bays

The following table lists the ordering information for the drive bays. Drive bays connect to the onboard SATA and onboard NVMe ports that are connected to the Intel PCH and Processor 1 respectively, as shown in the System architecture section.

The ThinkSystem M.2 SATA/NVMe 2-Bay Enablement Kit for Dense Systems has the following features:

• Supports one or two M.2 drives, either SATA or NVMe
• When two drives installed, they must be either both SATA or both NVMe
• Supports 42mm, 60mm, 80mm and 110mm drive form factors (2242, 2260, 2280 and 22110)
• Either 6Gbps SATA or PCIe 3.0 x1 interface to the drives depending on the drives installed
• Uses the onboard SATA and NVMe controllers of the server
• JBOD native support; no built-in RAID support (RAID can be enabled via Intel VROC)
• Supports monitoring and reporting of events and temperature through I2C
• Firmware update via Lenovo firmware update tools

The drives of the SD630 V2 are connected to controller on the system board:

• Onboard SATA ports with software RAID support (Intel VROC SATA RAID, formerly known as Intel RSTe)
• Onboard NVMe ports with software RAID support (Intel VROC NVMe RAID)

The following table lists the adapters used for the internal storage of the server.

The onboard SATA controller has the following features:

• Controller integrated into the Intel PCH
• 6 Gbps SATA host interface
• Supports RAID-0, and RAID-1 with two drives (Intel VROC SATA RAID, previously known as RSTe)
• Supports JBOD

The onboard NVMe support has the following features:

• Controller integrated into the Intel processor
• Each drive has PCIe 4.0 x4 host interface
• Supports JBOD - Intel and non-Intel NVMe SSDs - no license required
• Supports RAID-0 and RAID-1 (Intel VROC NVMe RAID) - Intel NVMe SSDs only

The following tables list the drive options for internal storage of the server.

The SD630 V2 has one PCIe slot standard, implemented on a riser at the front of the server:

• Slot 1: PCIe 4.0 x16 low-profile slot

Ordering information is listed in the following table.

The SD630 V2 has two dedicated network ports connected to an onboard Mellanox ConnectX-4 Lx controller.

• 25GbE port, implemented with an SFP28 cage for optical or copper connections
• 1GbE port, implemented with an RJ45 port for copper cabling

Locations of these ports is shown in the Components and connectors section. Either onboard port supports NC-SI for remote management. For factory orders, to specify which ports should have NC-SI enabled, use the feature codes listed in the Remote Management section. If neither is chosen, both ports will have NC-SI disabled.

For the specifications of the controller, see the Mellanox ConnectX-4 product guide:
https://lenovopress.com/lp0098-mellanox-connectx-4

The following table lists the transceivers that are supported in the 25GbE port.

The following table lists the fiber optic cables and Active Optical Cables that are supported in the 25GbE port.

The SD630 V2 does not support SAS or Fibre Channel host bus adapters for external storage.

The SD630 V2 does not support GPUs.

The SD630 V2 does not support Flash storage adapters.

The ThinkSystem DA240 enclosure supports two redundant hot-swap power supplies. The power supply choices are listed in the following table. All power supplies used in server must be identical.

Power supply options do not include a line cord. For server configurations, the inclusion of a power cord is model dependent. Configure-to-order models can be configured without power cords if desired.

The enclosure has 3 hot-swap 80mm dual-rotor N+1 redundant fans which are used to cool all components. The quantity required depends on the processors selected:

• Processors with TDP ≤ 165W: 2 fans
• Processors with TDP > 165W: 3 fans

In addition, each power supply has its own integrated fan. All fans are located at the rear of the enclosure as shown in in the Components and connectors section.

Ordering information for the enclosure fans is listed in the following table.

The server contains an integrated service processor, XClarity Controller (XCC), which provides advanced service-processor control, monitoring, and alerting functions. The XCC is based on the Pilot4 XE401 baseboard management controller (BMC) using a dual-core ARM Cortex A9 service processor.

Topics in this section

• Local management
• External Diagnostics Handset
• System status with XClarity Mobile
• Remote management
• Remote management using the SMM
• Lenovo XClarity Provisioning Manager
• Lenovo XClarity Essentials
• Lenovo XClarity Administrator
• Lenovo XClarity Energy Manager
• Lenovo Capacity Planner

Local management

The SD630 V2 server supports a local console with the use of a console breakout cable. The cable connects to the port on the front of the server as shown in the following figure.

Figure 8. Console breakout cable

The cable has the following connectors:

• VGA port
• Serial port
• USB 3.1 Gen 1 (5 Gb/s) port

As well as local console functions, the USB port on the breakout cable also supports the use of the XClarity Mobile app as described in the next section.

Ordering information for the cable is listed in the following table.

Figure 9. SD630 V2 External Diagnostics Handset

Ordering information for the External Diagnostics Handset with is listed in the following table.

The steps to connect the mobile device are as follows:

1. Enable USB Management on the server, by holding down the ID button for 3 seconds (or pressing the dedicated USB management button if one is present)
2. Connect the mobile device via a USB cable to the server's USB port with the management symbol
3. In iOS or Android settings, enable Personal Hotspot or USB Tethering
4. Launch the Lenovo XClarity Mobile app

Remote management

Remote server management is provided through industry-standard interfaces:

• Intelligent Platform Management Interface (IPMI) Version 2.0
• Simple Network Management Protocol (SNMP) Version 3 (no SET commands; no SNMP v1)
• Common Information Model (CIM-XML)
• Representational State Transfer (REST) support
• Redfish support (DMTF compliant)
• Web browser - HTML 5-based browser interface (Java and ActiveX not required) using a responsive design (content optimized for device being used - laptop, tablet, phone) with NLS support

The 1Gb and 25Gb embedded ports support NC-SI. You can enable NC-SI in the factory using the feature codes listed in the following table.

There are two XClarity Controller upgrades available for the server, Advanced and Enterprise.

XCC Advanced Upgrade adds the following functions:

• Remotely viewing video with graphics resolutions up to 1600x1200 at 75 Hz with up to 23 bits per pixel, regardless of the system state
• Remotely accessing the server using the keyboard and mouse from a remote client
• International keyboard mapping support
• Syslog alerting
• Redirecting serial console via SSH
• Component replacement log (Maintenance History log)
• Access restriction (IP address blocking)
• Lenovo SED security key management
• Displaying graphics for real-time and historical power usage data and temperature

XCC Enterprise Upgrade enables the following additional features:

• Boot video capture and crash video capture
• Virtual console collaboration - Ability for up to 6 remote users to be log into the remote session simultaneously
• Remote console Java client
• Mapping the ISO and image files located on the local client as virtual drives for use by the server
• Mounting the remote ISO and image files via HTTPS, SFTP, CIFS, and NFS
• Power capping
• System utilization data and graphic view
• Single sign on with Lenovo XClarity Administrator
• Update firmware from a repository
• License for XClarity Energy Manager

For systems with XCC Standard or XCC Advanced installed, field upgrades are available as listed in the following table.

Remote management using the SMM

The DA240 includes a System Management Module 2 (SMM), installed in the rear of the enclosure. See Figure 3 for the location of the SMM. The SMM provides remote management of both the enclosure and the individual servers installed in the enclosure. The SMM can be accessed through a web browser interface and via Intelligent Platform Management Interface (IPMI) 2.0 commands.

The SMM provides the following functions:

• Remote connectivity to XCC controllers in each node in the enclosure
• Node-level reporting and control (for example, node virtual reseat/reset)
• Enclosure power management
• Enclosure thermal management
• Enclosure inventory

The SMM has the following ports and LEDs:

• 2x Gigabit Ethernet RJ45 ports for remote management access
• USB port and activation button for service
• SMM reset button
• System error LED (yellow)
• Identification (ID) LED (blue)
• Status LED (green)
• System power LED (green)

The USB service button and USB service port are used to gather service data in the event of an error. Pressing the service button copies First Failure Data Collection (FFDC) data to a USB key installed in the USB service port. The reset button is used to perform an SMM reset (short press) or to restore the SMM back to factory defaults (press for 4+ seconds).

The use of two RJ45 Ethernet ports enables the ability to daisy-chain the Ethernet management connections thereby reducing the number of ports you need in your management switches and reducing the overall cable density needed for systems management. With this feature you can connect the first SMM to your management network and the SMM in a second enclosure connects to the first SMM. The SMM in the third enclosure can then connect to the SMM in the second enclosure.

Up to 7 enclosures can be connected in a daisy-chain configuration, which means that with 4 servers in each node, a total of 28 servers can be managed remotely via one single Ethernet connection.

Notes:

• If you are using IEEE 802.1D spanning tree protocol (STP) then at most 6 enclosures can be connected together
• Do not form a loop with the network cabling. The dual-port SMM at the end of the chain should not be connected back to the switch that is connected to the top of the SMM chain.

Because Lenovo XClarity Administrator does not require any agent software to be installed on the managed endpoints, there are no CPU cycles spent on agent execution, and no memory is used, which means that up to 1GB of RAM and 1 - 2% CPU usage is saved, compared to a typical managed system where an agent is required.

LXEM is a licensed product. A single-node LXEM license is included with the XClarity Controller Enterprise upgrade as described in the Remote Management section. If your server does not have the XCC Enterprise upgrade, Energy Manager licenses can be ordered as shown in the following table.

The server offers the following electronic security features:

• Administrator and power-on password
• Trusted Platform Module (TPM) supporting TPM 2.0 (no support for TPM 1.2)
• Optional Nationz TPM 2.0, available only in China (CTO only)

The server is NIST SP 800-147B compliant.

The following table lists the security options for the SD630 V2.

* Not available as a field upgrade. The component is CTO or on pre-configured models only.

Platform Firmware Resiliency - Lenovo ThinkShield

Lenovo’s ThinkShield Security is a transparent and comprehensive approach to security that extends to all dimensions of our data center products: from development, to supply chain, and through the entire product lifecycle.

The ThinkSystem SD630 V2 includes Platform Firmware Resiliency (PFR) hardware Root of Trust (RoT) which enables the system to be NIST SP800-193 compliant. This offering further enhances key platform subsystem protections against unauthorized firmware updates and corruption, to restore firmware to an integral state, and to closely monitor firmware for possible compromise from cyber attacks.

PFR operates upon the following server components:

• UEFI image – the low-level server firmware that connects the operating system to the server hardware
• XCC image – the management “engine” software that controls and reports on the server status separate from the server operating system
• FPGA image – the code that runs the server’s lowest level hardware controller on the motherboard

The Lenovo Platform Root of Trust Hardware performs the following three main functions:

• Detection – Measures the firmware and updates for authenticity
• Recovery – Recovers a corrupted image to a known-safe image
• Protection – Monitors the system to ensure the known-good firmware is not maliciously written

These enhanced protection capabilities are implemented using a dedicated, discrete security processor whose implementation has been rigorously validated by leading third-party security firms. Security evaluation results and design details are available for customer review – providing unprecedented transparency and assurance.

The SD630 V2 includes support for Secure Boot, a UEFI firmware security feature developed by the UEFI Consortium that ensures only immutable and signed software are loaded during the boot time. The use of Secure Boot helps prevent malicious code from being loaded and helps prevent attacks, such as the installation of rootkits. Lenovo offers the capability to enable secure boot in the factory, to ensure end-to-end protection. Alternatively, Secure Boot can be left disabled in the factory, allowing the customer to enable it themselves at a later point, if desired.

The following table lists the feature code to enable secure boot in the factory, or to leave it disabled.

Security standards

The SD630 V2 supports the following security standards and capabilities:

• Industry Standard Security Capabilities
  • Intel CPU Enablement
    • AES-NI (Advanced Encryption Standard New Instructions)
    • CBnT (Converged Boot Guard and Trusted Execution Technology)
    • CET (Control flow Enforcement Technology)
    • Hardware-based side channel attack resilience enhancements
    • MKTME/TME (Multi-Key Total Memory Encryption)
    • SGX (Software Guard eXtensions)
    • SGX-TEM (Trusted Environment Mode)
    • TDX (Trust Domain Extensions)
    • TXT (Trusted eXecution Technology)
    • VT (Virtualization Technology)
    • XD (eXecute Disable)
  • Microsoft Windows Security Enablement
    • Credential Guard
    • Device Guard
    • Host Guardian Service
  • TCG (Trusted Computing Group) TPM (Trusted Platform Module) 2.0
  • UEFI (Unified Extensible Firmware Interface) Forum Secure Boot
• Hardware Root of Trust and Security
  • Independent security subsystem providing platform-wide NIST SP800-193 compliant Platform Firmware Resilience (PFR)
  • Management domain RoT supplemented by the Secure Boot features of XCC
• Platform Security

  For more information on platform security, see the paper “How to Harden the Security of your ThinkSystem Server and Management Applications” available from https://lenovopress.com/lp1260-how-to-harden-the-security-of-your-thinksystem-server.

  • Boot and run-time firmware integrity monitoring with rollback to known-good firmware (e.g., “self-healing”)
  • Non-volatile storage bus security monitoring and filtering
  • Resilient firmware implementation, such as to detect and defeat unauthorized flash writes or SMM (System Management Mode) memory incursions
  • Patented IPMI KCS channel privileged access authorization (USPTO Patent# 11,256,810)
  • Host and management domain authorization, including integration with CyberArk for enterprise password management
  • KMIP (Key Management Interoperability Protocol) compliant, including support for IBM SKLM and Thales KeySecure
  • Reduced “out of box” attack surface
  • Configurable network services
  • FIPS 140-3 (in process) validated cryptography for XCC
  • CNSA Suite 1.0 Quantum-resistant cryptography for XCC
  • Lenovo System Guard
• Standards Compliance and/or Support
  • NIST SP800-131A rev 2 “Transitioning the Use of Cryptographic Algorithms and Key Lengths”
  • NIST SP800-147B “BIOS Protection Guidelines for Servers”
  • NIST SP800-193 “Platform Firmware Resiliency Guidelines”
  • ISO/IEC 11889 “Trusted Platform Module Library”
  • Common Criteria TCG Protection Profile for “PC Client Specific TPM 2.0”
  • European Union Commission Regulation 2019/424 (“ErP Lot 9”) “Ecodesign Requirements for Servers and Data Storage Products” Secure Data Deletion
  • Optional FIPS 140-2 validated Self-Encrypting Disks (SEDs) with external KMIP-based key management
• Product and Supply Chain Security
  • Suppliers validated through Lenovo’s Trusted Supplier Program
  • Developed in accordance with Lenovo’s Secure Development Lifecycle (LSDL)
  • Continuous firmware security validation through automated testing, including static code analysis, dynamic network and web vulnerability testing, software composition analysis, and subsystem-specific testing, such as UEFI security configuration validation
  • Ongoing security reviews by US-based security experts, with attestation letters available from our third-party security partners
  • Digitally signed firmware, stored and built on US-based infrastructure and signed on US-based Hardware Security Modules (HSMs)
  • Manufacturing transparency via Intel Transparent Supply Chain (for details, see https://lenovopress.com/lp1434-introduction-to-intel-transparent-supply-chain-on-lenovo-thinksystem-servers)
  • TAA (Trade Agreements Act) compliant manufacturing, by default in Mexico for North American markets with additional US and EU manufacturing options
  • US 2019 NDAA (National Defense Authorization Act) Section 889 compliant

The server supports the following operating systems:

• Microsoft Windows Server 2016
• Microsoft Windows Server 2019
• Microsoft Windows Server 2022
• Red Hat Enterprise Linux 7.9
• Red Hat Enterprise Linux 8.2
• Red Hat Enterprise Linux 8.3
• Red Hat Enterprise Linux 8.4
• Red Hat Enterprise Linux 8.5
• Red Hat Enterprise Linux 8.6
• Red Hat Enterprise Linux 8.7
• Red Hat Enterprise Linux 9.0
• Red Hat Enterprise Linux 9.1
• SUSE Linux Enterprise Server 12 SP5
• SUSE Linux Enterprise Server 12 Xen SP5
• SUSE Linux Enterprise Server 15 SP2
• SUSE Linux Enterprise Server 15 SP3
• SUSE Linux Enterprise Server 15 Xen SP2
• SUSE Linux Enterprise Server 15 Xen SP3
• Ubuntu 18.04 LTS 64-bit
• Ubuntu 22.04 LTS 64-bit
• VMware ESXi 6.7 U3
• VMware ESXi 7.0 U2
• VMware ESXi 7.0 U3
• VMware ESXi 8.0

For a complete list of supported, certified and tested operating systems, plus additional details and links to relevant web sites, see the Operating System Interoperability Guide:
https://lenovopress.com/osig#servers=sd630-v2-7d1k

Virtualization support: The onboard SATA drives in the server can be used with virtualization hypervisors, including VMware ESXi, Linux KVM, Xen, and Microsoft Hyper-V, however support is limited to AHCI (non-RAID) mode. RSTe mode is not supported with virtualization hypervisors.

For configure-to-order configurations, the server can be preloaded with VMware ESXi installed on M.2 cards. Ordering information is listed in the following table.

The DA240 Enclosure can be installed in a 19-inch rack cabinet. Ordering information for the rail kit is listed in the following table.

The rail kit has the specifications listed in the following table.

 * For 0U PDU support, the rack must be at least 1100 mm (43.31 in.) deep.
*** Measured when mounted on the rack, from the front surface of the front mounting flange to the rearmost point of the rail.

Supported rack cabinets are listed in the Rack cabinets section.

Up to four SD630 V2 are installed in the DA240 enclosure. Each SD630 V2 has the following dimensions:

• Width: 215 mm (8.5 inches)
• Height: 41 mm (1.6 inches)
• Depth: 608 mm (24 inches) (615 mm, including the internal connector at the rear of the server)

The DA240 enclosure has the following overall physical dimensions, excluding components that extend outside the standard chassis, such as EIA flanges, front security bezel (if any), and power supply handles:

• Width: 448 mm (17.6 inches)
• Height: 87 mm (3.4 inches)
• Depth: 922 mm (36.3 inches)

The following table lists the detailed dimensions. See the figure below for the definition of each dimension.

Figure 11. Server dimensions

The SD630 V2 has the following weight:

• Minimum: 3.9 kg (8.6 lbs)
• Maximum: 6.4 kg (14.1 lbs)

The DA240 enclosure has the following weight:

• Minimum (with one node): 24.3 kg (53.5 lbs)
• Maximum (with four nodes): 44.2 kg (97.4 lbs)

The enclosure has the following electrical specifications for AC input power supplies:

• Input voltage:
  • 200 to 240 (nominal) Vac, 50 Hz or 60 Hz
  • 180 to 300 Vdc (China only)
• Inlet current:
  • 1800W power supply: 10 A
  • 2400W power supply: 14 A

The SD630 V2 complies with ASHRAE class A2 specifications, however depending on the ambient temperature, processor performance may be reduced:

• When operating above 30°C there may be performance impacts at high utilization for:
  • Processors with TDP of 165 watts or lower
• When operating above 25°C there may be performance impacts at high utilization for:
  • Processors with TDP of higher than 165 watts
  • Intel Xeon Gold 6334 8C 165W 3.5GHz Processor

The following specifications indicate the limits of particulates that the system can tolerate:

• Reactive gases:
  • The reactivity rate of copper coupons shall be less than 200 Angstroms per month (Å/month)
  • The reactivity rate of silver coupons shall be less than 200 Å/month
• Airborne particulates:
  • The room air should be continuously filtered with MERV 8 filters.
  • Air entering a data center should be filtered with MERV 11 or preferably MERV 13 filters.
  • The deliquescent relative humidity of the particulate contamination should be more than 60% RH
  • Data centers must be free of zinc whiskers

For additional information, see the Specifications section of the Setup Guide for the server, available from the Lenovo Documents site, https://pubs.lenovo.com/

The SD630 V2 and DA240 enclosure have a 3 year warranty:

• SD630 V2 (7D1K) - 3 year warranty
• DA240 Enclosure (7D1J) - 3 year warranty

The standard warranty terms are customer-replaceable unit (CRU) and onsite (for field-replaceable units FRUs only) with standard call center support during normal business hours and 9x5 Next Business Day Parts Delivered.

Lenovo’s additional support services provide a sophisticated, unified support structure for your data center, with an experience consistently ranked number one in customer satisfaction worldwide. Available offerings include:

• Premier Support

  Premier Support provides a Lenovo-owned customer experience and delivers direct access to technicians skilled in hardware, software, and advanced troubleshooting, in addition to the following:

  • Direct technician-to-technician access through a dedicated phone line
  • 24x7x365 remote support
  • Single point of contact service
  • End to end case management
  • Third-party collaborative software support
  • Online case tools and live chat support
  • On-demand remote system analysis
• Warranty Upgrade (Preconfigured Support)

  Services are available to meet the on-site response time targets that match the criticality of your systems.

  • 3, 4, or 5 years of service coverage
  • 1-year or 2-year post-warranty extensions
  • Foundation Service: 9x5 service coverage with next business day onsite response. YourDrive YourData is an optional extra (see below).
  • Essential Service: 24x7 service coverage with 4-hour onsite response or 24-hour committed repair (available only in select markets). Bundled with YourDrive YourData.
  • Advanced Service: 24x7 service coverage with 2-hour onsite response or 6-hour committed repair (available only in select markets). Bundled with YourDrive YourData.
• Managed Services

  Lenovo Managed Services provides continuous 24x7 remote monitoring (plus 24x7 call center availability) and proactive management of your data center using state-of-the-art tools, systems, and practices by a team of highly skilled and experienced Lenovo services professionals.

  Quarterly reviews check error logs, verify firmware & OS device driver levels, and software as needed. We’ll also maintain records of latest patches, critical updates, and firmware levels, to ensure you systems are providing business value through optimized performance.

• Technical Account Management (TAM)

  A Lenovo Technical Account Manager helps you optimize the operation of your data center based on a deep understanding of your business. You gain direct access to your Lenovo TAM, who serves as your single point of contact to expedite service requests, provide status updates, and furnish reports to track incidents over time. In addition, your TAM will help proactively make service recommendations and manage your service relationship with Lenovo to make certain your needs are met.

• Enterprise Server Software Support

  Enterprise Software Support is an additional support service providing customers with software support on Microsoft, Red Hat, SUSE, and VMware applications and systems. Around the clock availability for critical problems plus unlimited calls and incidents helps customers address challenges fast, without incremental costs. Support staff can answer troubleshooting and diagnostic questions, address product comparability and interoperability issues, isolate causes of problems, report defects to software vendors, and more.

• YourDrive YourData

  Lenovo’s YourDrive YourData is a multi-drive retention offering that ensures your data is always under your control, regardless of the number of drives that are installed in your Lenovo server. In the unlikely event of a drive failure, you retain possession of your drive while Lenovo replaces the failed drive part. Your data stays safely on your premises, in your hands. The YourDrive YourData service can be purchased in convenient bundles and is optional with Foundation Service. It is bundled with Essential Service and Advanced Service.

• Health Check

  Having a trusted partner who can perform regular and detailed health checks is central to maintaining efficiency and ensuring that your systems and business are always running at their best. Health Check supports Lenovo-branded server, storage, and networking devices, as well as select Lenovo-supported products from other vendors that are sold by Lenovo or a Lenovo-Authorized Reseller.

Examples of region-specific warranty terms are second or longer business day parts delivery or parts-only base warranty.

If warranty terms and conditions include onsite labor for repair or replacement of parts, Lenovo will dispatch a service technician to the customer site to perform the replacement. Onsite labor under base warranty is limited to labor for replacement of parts that have been determined to be field-replaceable units (FRUs). Parts that are determined to be customer-replaceable units (CRUs) do not include onsite labor under base warranty.

If warranty terms include parts-only base warranty, Lenovo is responsible for delivering only replacement parts that are under base warranty (including FRUs) that will be sent to a requested location for self-service. Parts-only service does not include a service technician being dispatched onsite. Parts must be changed at customer’s own cost and labor and defective parts must be returned following the instructions supplied with the spare parts.

Lenovo Services is a dedicated partner to your success. Our goal is to reduce your capital outlays, mitigate your IT risks, and accelerate your time to productivity.

Here’s a more in-depth look at what we can do for you:

• Asset Recovery Services

  Asset Recovery Services (ARS) helps customers recover the maximum value from their end-of-life equipment in a cost-effective and secure way. On top of simplifying the transition from old to new equipment, ARS mitigates environmental and data security risks associated with data center equipment disposal. Lenovo ARS is a cash-back solution for equipment based on its remaining market value, yielding maximum value from aging assets and lowering total cost of ownership for your customers. For more information, see the ARS page, https://lenovopress.com/lp1266-reduce-e-waste-and-grow-your-bottom-line-with-lenovo-ars.

• Assessment Services

  An Assessment helps solve your IT challenges through an onsite, multi-day session with a Lenovo technology expert. We perform a tools-based assessment which provides a comprehensive and thorough review of a company's environment and technology systems. In addition to the technology based functional requirements, the consultant also discusses and records the non-functional business requirements, challenges, and constraints. Assessments help organizations like yours, no matter how large or small, get a better return on your IT investment and overcome challenges in the ever-changing technology landscape.

• Design Services

  Professional Services consultants perform infrastructure design and implementation planning to support your strategy. The high-level architectures provided by the assessment service are turned into low level designs and wiring diagrams, which are reviewed and approved prior to implementation. The implementation plan will demonstrate an outcome-based proposal to provide business capabilities through infrastructure with a risk-mitigated project plan.

• Basic Hardware Installation

  Lenovo experts can seamlessly manage the physical installation of your server, storage, or networking hardware. Working at a time convenient for you (business hours or off shift), the technician will unpack and inspect the systems on your site, install options, mount in a rack cabinet, connect to power and network, check and update firmware to the latest levels, verify operation, and dispose of the packaging, allowing your team to focus on other priorities.

• Deployment Services

  When investing in new IT infrastructures, you need to ensure your business will see quick time to value with little to no disruption. Lenovo deployments are designed by development and engineering teams who know our Products & Solutions better than anyone else, and our technicians own the process from delivery to completion. Lenovo will conduct remote preparation and planning, configure & integrate systems, validate systems, verify and update appliance firmware, train on administrative tasks, and provide post-deployment documentation. Customer’s IT teams leverage our skills to enable IT staff to transform with higher level roles and tasks.

• Integration, Migration, and Expansion Services

  Move existing physical & virtual workloads easily, or determine technical requirements to support increased workloads while maximizing performance. Includes tuning, validation, and documenting ongoing run processes. Leverage migration assessment planning documents to perform necessary migrations.

The SD630 V2 conforms to the following standards:

• ANSI/UL 62368-1
• IEC 62368-1 (CB Certificate and CB Test Report)
• FCC - Verified to comply with Part 15 of the FCC Rules, Class A
• Canada ICES-003, issue 7, Class A
• CSA C22.2 No. 62368-1
• CISPR 32, Class A, CISPR 35
• Japan VCCI, Class A
• Taiwan BSMI CNS13438, Class A; Section 5 of CNS15663
• CE, UKCA Mark (EN55032 Class A, EN62368-1, EN55024, EN55035, EN61000-3-2, EN61000-3-3, (EU) 2019/424, and EN50581-1 (RoHS))
• Korea KN32, Class A, KN35
• Russia, Belorussia and Kazakhstan, TP EAC 037/2016 (for RoHS)
• Australia/New Zealand AS/NZS CISPR 32, Class A; AS/NZS 62368.1
• UL Green Guard, UL2819
• Energy Star 3.0
• EPEAT (NSF/ ANSI 426) Bronze
• China CELP certificate, HJ 2507-2011
• Japanese Energy-Saving Act
• India BIS 13252 (Part 1)

The DA240 conforms to the following standards:

• ANSI/UL 62368-1
• IEC 62368-1 (CB Certificate and CB Test Report)
• FCC - Verified to comply with Part 15 of the FCC Rules, Class A
• Canada ICES-003, issue 7, Class A
• CSA C22.2 No. 62368-1
• CISPR 32, Class A, CISPR 35
• Japan VCCI, Class A
• CE, UKCA Mark (EN55032 Class A, EN62368-1, EN55024, EN55035, EN61000-3-2, EN61000-3-3, (EU) 2019/424, and EN50581-1 (RoHS))
• Korea KN32, Class A, KN35
• Russia, Belorussia and Kazakhstan, TP EAC 037/2016 (for RoHS)
• Russia, Belorussia and Kazakhstan, EAC: TP TC 004/2011 (for Safety); TP TC 020/2011 (for EMC)
• Australia/New Zealand AS/NZS CISPR 32, Class A; AS/NZS 62368.1
• UL Green Guard, UL2819
• China CELP certificate, HJ 2507-2011
• Mexico NOM-019
• TUV-GS (EN62368-1, and EK1-ITB2000)
• India BIS 13252 (Part 1)
• Germany GS

The following table lists the power distribution units (PDUs) that are offered by Lenovo.

For more information, see the Lenovo Press documents in the PDU category:
https://lenovopress.com/servers/options/pdu

The following table lists the supported rack cabinets.

For specifications about these racks, see the Lenovo Rack Cabinet Reference, available from:
https://lenovopress.com/lp1287-lenovo-rack-cabinet-reference

For more information, see the list of Product Guides in the Rack cabinets category:
https://lenovopress.com/servers/options/racks

The following table lists the supported KVM consoles.

The following table lists the available KVM switches and the options that are supported with them.

For more information, see the list of Product Guides in the KVM Switches and Consoles category:
http://lenovopress.com/servers/options/kvm

Lenovo Financial Services reinforces Lenovo’s commitment to deliver pioneering products and services that are recognized for their quality, excellence, and trustworthiness. Lenovo Financial Services offers financing solutions and services that complement your technology solution anywhere in the world.

We are dedicated to delivering a positive finance experience for customers like you who want to maximize your purchase power by obtaining the technology you need today, protect against technology obsolescence, and preserve your capital for other uses.

We work with businesses, non-profit organizations, governments and educational institutions to finance their entire technology solution. We focus on making it easy to do business with us. Our highly experienced team of finance professionals operates in a work culture that emphasizes the importance of providing outstanding customer service. Our systems, processes and flexible policies support our goal of providing customers with a positive experience.

We finance your entire solution. Unlike others, we allow you to bundle everything you need from hardware and software to service contracts, installation costs, training fees, and sales tax. If you decide weeks or months later to add to your solution, we can consolidate everything into a single invoice.

Our Premier Client services provide large accounts with special handling services to ensure these complex transactions are serviced properly. As a premier client, you have a dedicated finance specialist who manages your account through its life, from first invoice through asset return or purchase. This specialist develops an in-depth understanding of your invoice and payment requirements. For you, this dedication provides a high-quality, easy, and positive financing experience.

For your region-specific offers, please ask your Lenovo sales representative or your technology provider about the use of Lenovo Financial Services. For more information, see the following Lenovo website:

https://www.lenovo.com/us/en/landingpage/lenovo-financial-services/

For more information, see these resources:

• ThinkSystem SD630 V2 product page
  https://www.lenovo.com/us/en/data-center/servers/high-density/ThinkSystem-SD630-V2/p/77XX7DSD632
• ThinkSystem SD630 V2 datasheet
  https://lenovopress.com/DS0130
• Interactive 3D Tour of the ThinkSystem SD630 V2:
  https://lenovopress.com/LP1426
• ThinkSystem SD630 V2 drivers and support
  http://datacentersupport.lenovo.com/products/servers/thinksystem/sd630v2/7d1k/downloads
• Lenovo ThinkSystem SD630 V2 product publications:
  http://thinksystem.lenovofiles.com/help/index.jsp
  • Quick Start
  • Rack Installation Guide
  • Setup Guide
  • Hardware Maintenance Manual
  • Messages and Codes Reference
  • Memory Population Reference
• ServerProven hardware compatibility:
  http://www.lenovo.com/us/en/serverproven