skip to main content

Voltaire 40 Gb InfiniBand Switch Module for BladeCenter

Product Guide (withdrawn product)

Home
Top
Author
Updated
4 Dec 2009
Form Number
TIPS0696
PDF size
8 pages, 188 KB

Abstract

Clients want to increase the use of their existing servers to reduce overall cost as well as the IT footprint within the organization. BladeCenter offers several choices, including servers, chassis, and the type of interconnect fabric. This solution offers end-to-end 40 Gb (4X QDR) InfiniBand connectivity. Clients can take advantage of the resiliency of BladeCenter as well as the performance of 4X QDR InfiniBand in a single package. The InfiniBand switch module is based on proven Voltaire design and offers 14 40 Gb ports, one to each server, and 16 ports out of the chassis per switch. This solution offers a no compromise, congestion free solution to meet even the most performance hungry applications.

Note: This adapter is now withdrawn from marketing.

Introduction

Clients want to increase the use of their existing servers to reduce overall cost as well as the IT footprint within the organization. BladeCenter offers several choices, including servers, chassis, and the types of interconnect fabric. This solution offers end-to-end 40 Gb (4X QDR) InfiniBand connectivity. Clients can take advantage of the resiliency of BladeCenter as well as the performance of 4X QDR InfiniBand in a single package.

The Voltaire 40 Gb InfiniBand Switch Module for BladeCenter provides InfiniBand QDR connectivity between the server platform's high performance blade servers and external InfiniBand fabrics in non-blocking designs, all on a single device. Voltaire's high speed module also accommodates performance-optimized fabric designs utilizing a single BladeCenter chassis or stacking multiple BladeCenter chassis without requiring an external InfiniBand switch.

The InfiniBand switch module offers 14 Gb ports, one to each server, and 16 ports out of the chassis per switch. This solution offers a no compromise, congestion free solution to meet even the most performance hungry applications.

Figure 1 shows the switch module.

Voltaire 40 Gb InfiniBand Switch Module for BladeCenter
Figure 1. Voltaire 40 Gb InfiniBand Switch Module for BladeCenter

Did you know?

The module's HyperScale architecture also provides a unique inter-switch link or mesh capability to form highly scalable, cost effective, and low latency fabrics. Since this switch has 16 uplink ports, they can create a meshed architecture and still have unblocked access to data using the 14 uplink ports. This solution can scale from 14 to 126 nodes and offer latency less than 200 nanosecond allowing applications to operate at maximum efficiency.

Part number information

Table 1 shows the part numbers to order the module and the supported cables.

Table 1. Part number and feature code for ordering

Description Part number Feature codes
Voltaire 40 Gb InfiniBand Switch Module for BladeCenter 46M6005* 0057
3 m Copper QDR InfiniBand QSFP Cable 49Y9980* 3866

* Withdrawn from marketing

The Voltaire 40 Gb InfiniBand Switch Module part number includes the following items:

  • One Voltaire 40 Gb InfiniBand Switch Module
  • Documentation package

Features and specifications

The Voltaire 40 Gb InfiniBand Switch Module includes the following features and functions:

  • Form-factor
    • Double-height high-speed switch module
  • Internal ports
    • 14 internal 4X QDR/DDR/SDR InfiniBand to the server blades
    • Two internal 4X InfiniBand ports to the bridge modules
  • External ports
    • Up to 16 auto-sensing 4X QDR/DDR/SDR InfiniBand QSFP ports (40, 20, or 10 Gbps auto-negotiate)
  • Characteristics
    • Full QDR rate InfiniBand switching
    • Based on the Infiniscale-IV device
    • Up to 40 Gbps performance for clusters and grids (bidirectional)
    • Hot swap support, with soft start and current limiting
    • Bay address and presence support
    • High temperature monitoring
    • Full BladeCenter H AMM interface via I2C
    • Fully non-blocking QDR blade
    • QSFP front panel connectors
    • On board CPU for chassis management capabilities
    • Ultra-low latency: under 100 nanoseconds blade to blade connectivity
    • Built-in high availability
    • Port status controlability

Supported BladeCenter chassis and expansion cards

The Voltaire 40 Gb InfiniBand Switch Module is supported only in the BladeCenter H chassis as listed in Table 2.

Table 2. BladeCenter chassis that support the Voltaire 40 Gb InfiniBand Switch Module

I/O module Part number BladeCenter S BladeCenter E BladeCenter H BladeCenter T BladeCenter HT MSIM MSIM-HT
Voltaire 40 Gb InfiniBand Switch Module 46M6005 N N Y N N N N

The Voltaire 40 Gb InfiniBand Switch Module support the expansion cards listed in Table 3. This table also lists the chassis bays in which the switch module must be installed when used with each expansion card.

Table 3. Voltaire 40 Gb InfiniBand Switch Module and BladeCenter chassis I/O bays support

    Bay 1 (Standard) Bay 2 (Standard) Bay 3 (Standard) Bay 4 (Standard) Bay 5 (Bridge) Bay 6 (Bridge) Bay 7 (High-speed) Bay 8 (High-speed) Bay 9 (High-speed) Bay 10 (High-speed)
2-Port 40Gb InfiniBand Expansion Card (CFFh) 46M6001 N N N N N N Y Y Y Y
InfiniBand 4X DDR Expansion Card (CFFh) 43W4423 N N N N N N Y Y Y Y
Voltaire 4X InfiniBand DDR (CFFh) 43W4420 N N N N N N Y Y Y Y

Note: The Voltaire 40 Gb InfiniBand Switch Module is a double-high switch module and occupies two adjacent high-speed bays (7 and 8 or 9 and 10).

The BladeCenter H chassis has four standard I/O bays (1, 2, 3, and 4), two bridge bays (5 and 6), and four high-speed bays (7, 8, 9, and 10). The Voltaire 40 Gb InfiniBand Switch Module is supported only in the BladeCenter H chassis and occupies two adjacent high-speed I/O bay (bays 7 and 8, or bays 9 and 10).

Connectors and LEDs

Figure 3 shows the left side of the Voltaire 40 Gb InfiniBand Switch Module front panel.

Left side of front panel of the Voltaire 40 Gb InfiniBand Switch Module
Figure 3. Left side of front panel of the Voltaire 40 Gb InfiniBand Switch Module*

* The port LEDs on the right side of front panel of the Voltaire 40 Gb InfiniBand Switch Module are the same as on the left side.

The front panel contains the following components:

  • Three status LEDs display the status of the switch module and the network:
    • OK (indicating that the switch module has passed the power-on self-test (POST) with no critical faults and is operational)
    • Switch-module error (indicating that the switch module has failed the POST or detected an operational fault)
    • SM (reserved for future use)
  • 16 QSFP port connectors to attach QSFP cables.
    • Each external QSFP port on the switch module contains IB physical link and IB logical link LEDs

Network cabling requirements

The Voltaire 40 Gb InfiniBand Switch Module supports the following cable:

  • 3 m Copper QDR InfiniBand QSFP Cable, part number 49Y9980

Related product families

Product families related to this document are the following:

Trademarks

Lenovo and the Lenovo logo are trademarks or registered trademarks of Lenovo in the United States, other countries, or both. A current list of Lenovo trademarks is available on the Web at https://www.lenovo.com/us/en/legal/copytrade/.

The following terms are trademarks of Lenovo in the United States, other countries, or both:
Lenovo®
BladeCenter®

Other company, product, or service names may be trademarks or service marks of others.