Top
Abstract
The Flex System EN6132 2-port 40Gb Ethernet Adapter and Mellanox ConnectX-3 Mezz 40Gb 2-Port Ethernet Adapter in conjunction with the EN6131 40Gb Ethernet Switch offer the performance that you need to support clustered databases, parallel processing, transactional services, and high-performance embedded I/O applications, which reduces task completion time and lowers the cost per operation.
This product guide provides essential presales information to understand the Mellanox adapters and their key features, specifications and compatibility. This guide is intended for technical specialists, sales specialists, sales engineers, IT architects, and other IT professionals who want to learn more about the adapters and consider their use in IT solutions.
Withdrawn: The adapters listed in this product guide are now withdrawn from marketing.
Introduction
The Flex System EN6132 2-port 40Gb Ethernet Adapter and Mellanox ConnectX-3 Mezz 40Gb 2-Port Ethernet Adapter in conjunction with the EN6131 40Gb Ethernet Switch offer the performance that you need to support clustered databases, parallel processing, transactional services, and high-performance embedded I/O applications, which reduces task completion time and lowers the cost per operation.
The EN6132 and ConnectX-3 adapters can help you achieve efficient computing by offloading protocol processing from the CPU and data movement impact, such as RDMA over Converged Ethernet and Send/Receive semantics, which allows more processor power for the application.
The EN6132 2-port 40Gb Ethernet Adapter is shown in Figure 1.
Figure 1. Flex System EN6132 2-port 40Gb Ethernet Adapter
Did you know?
The 40 Gb Ethernet solution that is offered by Flex System can deploy more workloads per server without running into I/O bottlenecks. If there are failures or server maintenance, clients can move their virtual machines much faster by using 40 Gb interconnects within the chassis.
The 40 GbE switch and adapter are designed for low latency, high bandwidth, and computing efficiency for performance-driven server and storage clustering applications. They provide extreme scalability for low-latency clustered solutions with reduced packet hops.
Part number information
Table 1 shows the part numbers for ordering the adapters.
Withdrawn: Both adapters listed in this product guide are now withdrawn from marketing.
| Part number | Feature code | Description |
|---|---|---|
| 90Y3482 | A3HK | Flex System EN6132 2-port 40Gb Ethernet Adapter |
| 7ZT7A00502 | AVCU | ThinkSystem Mellanox ConnectX-3 Mezz 40Gb 2-Port Ethernet Adapter |
The part numbers includes the following items:
- One adapter for use in ThinkSystem and Flex System compute nodes
- Documentation
Benefits
The ConnectX-3 Mezz 40Gb 2-Port Ethernet Adapter and EN6132 2-port 40Gb Ethernet Adapter offer the following benefits:
- 10 GbE and 40 GbE connectivity to servers and storage
- Industry-leading throughput performance with low latency
- Ideal for clients running Ethernet infrastructure in high speed trading, Web 2.0, virtualization, and cloud computing
- Enables clients to maximize compute usage by removing I/O bottlenecks
- Improved application productivity and efficiency with support for protocol offload and RDMA over Converged Ethernet
- Support for industry-standard SR-IO Virtualization technology to deliver VM protection and granular levels of I/O services to applications
- High-availability and high-performance for data center networking
- Software compatibility with standard TCP/UDP/IP and iSCSI stacks
- Low power, low cost, and high reliability
Features and specifications
The adapters have the following features and specifications:
- Based on Mellanox ConnectX-3 technology
- PCI Express 3.0 x8 host-interface
- Two 40 Gb Ethernet ports that can operate at 10 Gbps or 40 Gbps speeds
- CPU offload of transport operations
- RDMA over Converged Ethernet (RoCE).
- TCP/UDP/IP stateless offload.
- TCP/UDP/IP checksum offload
- TCP Large Send or Giant Send offload for segmentation
- Receive Side Scaling (RSS)
- End-to-end quality of service (QoS) and congestion control
- Support for IEEE 802.1p and IP DSCP/TOS traffic processing based on the class of service.
- Support for 802.3x flow control.
- Congestion Notification (IEEE Std 802.3Qau) limits the transmission rate to avoid frame losses in case of congestion in the network.
- Priority-Based Flow Control (PFC) (IEEE 802.1Qbb) extends 802.3x standard flow control to allow the switch to pause traffic based on the 802.1p priority value in each packet’s VLAN tag.
- Enhanced Transmission Selection (ETS) (IEEE 802.1Qaz) provides a method for allocating link bandwidth based on the 802.1p priority value in each packet’s VLAN tag.
- Hardware-based I/O virtualization
- Jumbo frame support (up to 10 KB)
- 802.1Q VLAN tagging
- NIC teaming and failover (static and LACP)
- Support for Wake on LAN (WoL)
Supported standards
The adapters support the following Ethernet standards:
- IEEE 802.1p Class of Service (CoS) prioritization
- IEEE 802.1Q Tagged VLAN
- IEEE 802.1Qbb Priority-Based Flow Control (PFC)
- IEEE 802.1Qaz Enhanced Transmission Selection (ETS)
- IEEE 802.3ad Link Aggregation Control Protocol
- IEEE 802.3ae 10GBASE-KR backplane 10 Gb Ethernet
- IEEE 802.3ba 40GBASE-KR4 backplane 40 Gb Ethernet
- IEEE 802.3Qau Congestion Notification
- IEEE 802.3x Full-duplex Flow Control
Supported servers
The following table lists the ThinkSystem and Flex System compute nodes that support the adapters.
| Part number |
Description |
x240 (8737, E5-2600 v2)
|
x240 (7162)
|
x240 M5 (9532, E5-2600 v3)
|
x240 M5 (9532, E5-2600 v4)
|
x440 (7167)
|
x880/x480/x280 X6 (7903)
|
x280/x480/x880 X6 (7196)
|
SN550 (7X16)
|
SN850 (7X15)
|
|---|---|---|---|---|---|---|---|---|---|---|
| 90Y3482 | Flex System EN6132 2-port 40Gb Ethernet Adapter | N | Y | Y | Y | N | N | Y | N | N |
| 7ZT7A00502 | ThinkSystem Mellanox ConnectX-3 Mezz 40Gb 2-Port Ethernet Adapter | N | N | N | N | N | N | N | Y | Y |
Supported I/O modules
The EN6132 2-port 40Gb Ethernet Adapter supports the I/O modules that are listed in the following table.
| Part number | Feature code | Description |
| 90Y9346 | A3HJ | Flex System EN6131 40Gb Ethernet Switch |
Other I/O modules: Other I/O modules that are not listed in Table 3 are not supported.
The supported I/O modules are installed in the I/O bays in the rear of the Flex System Enterprise Chassis, as shown in the following figure.
Figure 2. Location of the I/O module bays in the Flex System Enterprise Chassis
The connections between the EN6132 adapters that are installed in the compute nodes to the supported I/O modules that are installed in the chassis I/O bays are shown in the figure below. The figure also shows both half-wide compute nodes, such as the SN550 with two adapters, and full-wide compute nodes, such as the SN850 with four adapters.
Figure 3. Logical layout of the interconnects between adapters and I/O modules
The adapters can be installed in slots A1 and A2 of the half-wide compute nodes (such as x240 M5 and SN550), and slots A1, A2, A3, and A4 of the full-wide compute nodes (such as x440 and SN850). A supported Ethernet I/O module must be installed in the corresponding I/O bay of the chassis (bays 1 and 2 when the adapter is installed slot A1 or A3 or bays 3 and 4 when the adapter is installed in slot A2 or A4).
In the compute nodes that have an integrated dual-port 10 GbE network interface controller (NIC), NIC ports are routed to bays 1 and 2 with a specialized periscope connector, and the adapter in slot A1 is not required. However, when needed, the periscope connector can be replaced with the EN6132 adapter. In such a case, integrated NIC is disabled.
The following table shows the connections between the adapters that are installed in the compute nodes to the supported I/O modules that are installed in the chassis.
| I/O adapter slot in the server |
Port on the adapter | Corresponding I/O module bay in the chassis | |||
|---|---|---|---|---|---|
| Bay 1 | Bay 2 | Bay 3 | Bay 4 | ||
| Slot 1 | Port 1 | Yes | |||
| Port 2 | Yes | ||||
| Slot 2 | Port 1 | Yes | |||
| Port 2 | Yes | ||||
| Slot 3 (full-wide compute nodes only) |
Port 1 | Yes | |||
| Port 2 | Yes | ||||
| Slot 4 (full-wide compute nodes only) |
Port 1 | Yes | |||
| Port 2 | Yes | ||||
The adapters are installed in slots in a supported compute node. The following shows the locations of the slots in the x240 Compute Node. The positions of the adapters in the other supported compute nodes are similar.
Figure 4. Location of the I/O adapter slots in the Flex System x240 Compute Node
Supported operating systems
The ThinkSystem Mellanox ConnectX-3 Mezz 40Gb 2-Port Ethernet Adapter supports the following operating systems:
- Microsoft Windows Server 2012 R2
- Microsoft Windows Server 2016
- Microsoft Windows Server 2019
- Microsoft Windows Server version 1709
- Microsoft Windows Server version 1803
- Red Hat Enterprise Linux 6.10
- Red Hat Enterprise Linux 6.9
- Red Hat Enterprise Linux 7.3
- Red Hat Enterprise Linux 7.4
- Red Hat Enterprise Linux 7.5
- Red Hat Enterprise Linux 7.6
- SUSE Linux Enterprise Server 11 SP4
- SUSE Linux Enterprise Server 11 SP4 with Xen
- SUSE Linux Enterprise Server 12 SP2
- SUSE Linux Enterprise Server 12 SP2 with Xen
- SUSE Linux Enterprise Server 12 SP3
- SUSE Linux Enterprise Server 12 SP3 with Xen
- SUSE Linux Enterprise Server 15
- VMware vSphere Hypervisor (ESXi) 6.0 U3
- VMware vSphere Hypervisor (ESXi) 6.5 U2
- VMware vSphere Hypervisor (ESXi) 6.7
- VMware vSphere Hypervisor (ESXi) 6.7 U1
The EN6132 2-port 40Gb Ethernet Adapter supports the following operating systems:
- Microsoft Windows Server 2016
- Microsoft Windows Server 2019
- Microsoft Windows Server version 1709
- Red Hat Enterprise Linux 6 Server x64 Edition
- SUSE Linux Enterprise Server 11 for AMD64/EM64T
- SUSE Linux Enterprise Server 12
- SUSE Linux Enterprise Server 15
- VMware vSphere 5.1 (ESXi)
- VMware vSphere Hypervisor (ESXi) 5.5
- VMware vSphere Hypervisor (ESXi) 6.0
- VMware vSphere Hypervisor (ESXi) 6.5
- VMware vSphere Hypervisor (ESXi) 6.7
Operating system support may vary by server. For more information, see ServerProven at http://www.lenovo.com/us/en/serverproven/. Select the server in question, scroll down to the adapter, and click the + icon in that row to show the supported operating systems.
Warranty
The adapters have a 1-year, customer-replaceable unit (CRU) limited warranty. When installed in a supported server, these adapters assume the server’s base warranty and any Lenovo warranty service upgrade.
Physical specifications
The adapters have the following physical specifications:
Dimensions and weight (approximate):
- Width: 100 mm (3.9 in.)
- Depth: 80 mm (3.1 in.)
- Weight: 13 g (0.3 lb)
Shipping dimensions and weight (approximate):
- Height: 58 mm (2.3 in.)
- Width: 229 mm (9.0 in.)
- Depth: 208 mm (8.2 in.)
- Weight: 0.4 kg (0.89 lb)
Agency approvals
The adapters conform to the following standards:
- IEC/EN 60950-1:2006
- ETSI EN 300 019-2-2
- IEC 60068-2- 64, 29, 32
Related product families
Product families related to this document are the following:
Trademarks
Lenovo and the Lenovo logo are trademarks or registered trademarks of Lenovo in the United States, other countries, or both. A current list of Lenovo trademarks is available on the Web at https://www.lenovo.com/us/en/legal/copytrade/.
The following terms are trademarks of Lenovo in the United States, other countries, or both:
Lenovo®
ServerProven®
ThinkSystem®
The following terms are trademarks of other companies:
Linux® is the trademark of Linus Torvalds in the U.S. and other countries.
Microsoft®, Windows Server®, and Windows® are trademarks of Microsoft Corporation in the United States, other countries, or both.
Other company, product, or service names may be trademarks or service marks of others.
