Lenovo ThinkSystem NE10032 RackSwitch

The Lenovo ThinkSystem NE10032 RackSwitch that uses 100 Gb QSFP28 and 40 Gb QSFP+ Ethernet technology is specifically designed for the data center. It is ideal for today's big data, cloud, and enterprise workload solutions. It is an enterprise class Layer 2 and Layer 3 full featured switch that delivers line-rate, high-bandwidth switching, filtering, and traffic queuing without delaying data. Large data center-grade buffers help keep traffic moving, while the hot-swap redundant power supplies and fans (along with numerous high-availability features) help provide high availability for business sensitive traffic.

The NE10032 RackSwitch has 32x QSFP+/QSFP28 ports that support 40 GbE and 100 GbE optical transceivers, active optical cables (AOCs), and direct attach copper (DAC) cables. The QSFP+/QSFP28 ports can also be split out into two 50 GbE (for 100 GbE ports), or four 10 GbE (for 40 GbE ports) or 25 GbE (for 100 GbE ports) connections by using breakout cables.

The NE10032 RackSwitch is ideal for latency sensitive applications, such as high-performance computing clusters and financial applications.

The NE10032 RackSwitch is shown in the following figure.


Figure 1. Lenovo ThinkSystem NE10032 RackSwitch

With exceptional port density and flexibility with break-out cables, the NE10032 RackSwitch can support up to 128x 10 GbE / 25 GbE Ethernet connections, or a mix of 10 GbE / 25 GbE server and storage connections with 40 GbE or 100 GbE upstream network connections, or up to 32x 40 GbE / 100 GbE connections in a 1U rack form factor.

The NE10032 RackSwitch runs the Lenovo Cloud Networking Operating System (CNOS) that provides a simple, open and programmable network infrastructure with cloud-scale performance. It delivers a software-defined Ethernet solution that is simple to manage and easy to deploy using common management tools, and it enables support of automation and orchestration applications for tight integration into the data center ecosystem.

The NE10032 RackSwitch runs the Cloud NOS that provides a simple, open and programmable network infrastructure designed to scale for your business needs. Its intelligent, cloud-scale performance delivers a software-defined Ethernet solution that is simple to manage and easy to deploy using common management tools. Cloud NOS is based on open, industry standards for better data center interoperability, and it enables support of automation and orchestration applications for tight integration into the data center ecosystem.

With its high-performance architecture and support for an extensive set of routing protocols, Cloud NOS provides reliable, high-performance fabric for traditional, converged and hyperscale solutions. Cloud NOS can help you consolidate server and storage networks into a single fabric. Converged Enhanced Ethernet delivers value for your iSCSI and NAS enterprise storage environments.

The NE10032 RackSwitch is considered particularly suited for the following environments:

• Mixed 10 GbE, 25 GbE, 40 GbE, and 100 GbE server and storage connectivity and upstream aggregation
• Cloud and virtualization solutions with VM-aware network automation and integration into Lenovo and third-party IT and cloud infrastructure management tools
• Converged SAN and LAN network via NAS, iSCSI, or FCoE storage connectivity
  • Reduced I/O cost (CAPEX) with fewer adapters and cables to purchase
  • Reduced complexity (OPEX) with fewer components to manage and lower energy cost
• Accelerated communications with lower latency across clustered applications and storage arrays with RDMA over Converged Ethernet (RoCE)
• Web-scale and hyperconverged solutions

The NE10032 RackSwitch offers the following features and benefits:

• High performance

  The 10 Gb/25 Gb/40 Gb/100 Gb Ethernet NE10032 RackSwitch provides a combination of low latency, non-blocking line-rate switching, and ease of management with 6.4 Tbps throughput.

• Lower power and better cooling

  The front-to-rear or rear-to-front cooling design of the NE10032 RackSwitch reduces data center air conditioning costs by having airflow match the servers in the rack. In addition, variable speed fans help reduce power consumption.

• Layer 3 functionality

  The NE10032 RackSwitch includes Layer 3 functionality, which provides security and performance benefits, as inter-VLAN traffic stays within the switch. This switch also provides the full range of Layer 3 protocols from static routes for technologies, such as Open Shortest Path First (OSPF) and Border Gateway Protocol (BGP) for enterprise customers.

• Network virtualization

  The NE10032 switch supports VXLAN Gateway for VMware NSX integration. VMware NSX is a virtualized network software platform that offers a full set of networking services, such as logical switching, routing, firewall, load balancing, VPN, quality of service (QoS), and monitoring.

• Converged fabric

  The NE10032 RackSwitch supports Converged Enhanced Ethernet (CEE) which helps enable customers to combine storage, messaging traffic, VoIP, video, and other data on a common data center lossless Ethernet infrastructure. As a result, customers can deploy a single server interface for multiple data types, which can simplify the deployment and management of server network connectivity while maintaining the high availability and robustness that is required for storage transactions.

• Fault tolerance

  The NE10032 RackSwitch offers redundant hot-swap hardware components, learns alternate routes automatically, and performs faster convergence if there is a link, switch, or power failure.

• Seamless interoperability

  RackSwitch switches perform seamlessly with other vendors' upstream switches.

• Automated VM-aware network provisioning

  The Lenovo CNOS Network Policy Agent, a ThinkAgile Network Orchestrator feature, gives increased visibility of the Nutanix (AOS version 5.0.2 or higher [excluding 5.1.2]) and VMware vSphere virtual infrastructure, including VM and virtual network information. It provides automated VM-aware provisioning by automatically configuring VLANs in the physical network based on the auto-discovered virtual network topology. The agent also performs ongoing dynamic updates to the physical network configuration in response to new VMs, updated VMs, and deleted VMs and virtual networks, eliminating errors with manual configuration.

• Pro-active congestion monitoring

  Telemetry enables continuous monitoring of networking devices to detect potential congestion problems, such as packets dropped by the switch when ports are being used close to their line rate or switch buffers are being temporarily overflown (for example, in case of microbursts).

• Zero Touch Provisioning

  Zero Touch Provisioning (ZTP) enables a switch to automatically provision itself using the resources available on the network, without manual intervention. ZTP automatically handles the process of upgrading the switch software image and installing configuration files.

• Python Scripting

  Network administrators can create and execute local Python scripts on switches to make small programs that allow a switch to automatically provision itself, perform fault monitoring, upgrade the image files, or auto-generate configuration files. Administrators can also implement version control systems, automatically generate alerts, create custom logging tools, and automate the management of network devices.

• REST API Programming

  The Lenovo REpresentational State Transfer (REST) Application Program Interface (API) enables network administrators to remotely configure and manage a Lenovo switch using REST and HyperText Transfer Protocol (HTTP). It also allows switch management integration into management applications, such as Lenovo XClarity.

The following figure shows the front (port-side) panel of the NE10032 RackSwitch.

Figure 2. Front panel of the NE10032 RackSwitch

The following table lists the NE10032 RackSwitch system specifications.

Note: The supported hardware options and software features listed in this product guide are based on the Lenovo Cloud Networking Operating System (CNOS) version 10.10. For details about specific CNOS software releases that introduced support for certain hardware options and software features, refer to the Release Notes for the particular software release that can be found at:
http://systemx.lenovofiles.com/help/topic/com.lenovo.thinksystem.ne10032.doc/ts_ne10032.html

The following table lists the NE10032 RackSwitch models.

The part numbers for the NE10032 RackSwitch models include the following items:

• One NE10032 RackSwitch with two power supplies and six fan assemblies (rear-to-front airflow or front-to-rear airflow)
• Generic Rack Mount Kit (2-post)
• Cable Kit that includes the following items:
  • DB-9 (plug) to RJ-45 (plug) serial console cable
  • Micro-USB Type B (plug) to USB Type A (plug) serial console cable
  • Micro-USB Type A (plug) to USB Type A (jack) data cable
• Electronic Publications Flyer

Configuration notes:

• Power cables are not included and must be ordered together with the switch (see Power supplies and cables for details).
• QSFP28 and QSFP+ transceivers and cables are not included and should be ordered together with the switch (see Transceivers and cables for details).

The NE10032 RackSwitch supports Features on Demand (FoD) license keys to enable additional features. The Advanced Instrumentation Tools FoD option enables access to low-level switch diagnostics for advanced troubleshooting.

The following table lists the FoD upgrade options for the NE10032 RackSwitch.

With the flexibility of the NE10032 RackSwitch, customers can choose the following connectivity technologies:

• For 10 GbE links, customers can split out four 10 GbE ports for each 40 GbE port by using QSFP+ to 4x SFP+ DAC or active optical breakout cables for distances up to 5 meters. The 40GBASE-iSR4 QSFP+ transceivers can be used for distances up to 100 meters on OM3 or up to 150 meters on OM4 MMF MPO-to-LC breakout cables. For longer distances, the 40GBASE-eSR4 transceivers can be used for up to 300 meters on OM3 or up to 400 meters on OM4 MMF MPO-to-LC breakout cables.

• For 25 GbE links, customers can split out four 25 GbE ports for each 100 GbE port by using QSFP28 to 4x SFP28 DAC breakout cables for distances up to 5 meters or active optical breakout cables for distances up to 20 meters. For longer distances, the 100GBASE-SR4 QSFP28 transceivers can be used for up to 70 meters on OM3 or up to 100 meters on OM4 MMF MPO-to-LC breakout cables.

• For 40 GbE links, customers can use the QSFP+ to QSFP+ DAC cables for distances up to 7 meters or QSFP+ to QSFP+ active optical cables for distances up to 20 meters. These DAC cables and AOCs have QSFP+ connectors on each end, and they do not need separate transceivers.

  For longer distances, customers can use the 40GBASE QSFP+ bi-directional transceivers or 40GBASE-SR4/iSR4 QSFP+ transceivers for distances up to 100 meters on OM3 or up to 150 meters on OM4 MMF cables. The 40GBASE-eSR4 QSFP+ transceiver can be used for distances up to 300 meters on OM3 or up to 400 meters on OM4 MMF cables. The 40GBASE-LR4 QSFP+ transceiver can be used for distances up to 10 kilometers on SMF cables.

• For 50 GbE links, customers can split out two 50 GbE ports for each QSFP28 port by using the QSFP28-2xQSFP28 DAC breakout cables (not supplied by Lenovo).

• For 100 GbE links, customers can use the QSFP28 DAC cables for distances up to 5 meters or QSFP28 active optical cables (AOCs) for distances up to 20 meters. These DAC cables and AOCs have QSFP28 connectors on each end, and they do not need separate transceivers.

  For longer distances, the 100GBASE-SR4 QSFP28 transceivers support distances up to 70 meters on OM3 or up to 100 meters on OM4 MMF cables. The 100GBASE-LR4 QSFP28 transceiver can be used for distances up to 10 kilometers on SMF LC cables.

The following table lists the supported cables and transceivers.

The network cables that can be used with the switch are listed in the following table.

The NE10032 RackSwitch with Cloud NOS has the following software features and specifications:

• Scalability and performance:
  • Media access control (MAC) address learning with automatic updates
  • Static and LACP (IEEE 802.3ad) link aggregation
  • Broadcast and multicast storm control
  • IGMP snooping to limit flooding of IP multicast traffic
  • IGMP filtering to control multicast traffic for hosts participating in multicast groups
  • Configurable traffic distribution schemes over trunk links based on source or destination IP or MAC addresses, or both
  • Fast port forwarding and fast uplink convergence for rapid STP convergence
• Availability and redundancy:
  • IEEE 802.1D STP for providing L2 redundancy
  • IEEE 802.1s Multiple STP (MSTP) for topology optimization
  • IEEE 802.1w Rapid STP (RSTP) provides rapid STP convergence for critical delay-sensitive traffic, such as voice or video
  • Per-VLAN Rapid STP (PVRST) enhancements
  • Layer 2 Failover to support active/standby configurations of NIC teaming on servers
  • Forwarding Error Correction (FEC) for 25 Gbps, 50 Gbps, and 100 Gbps port speeds
• VLAN support:

  • Up to 4095 VLANs:
    • VLAN 1 is the default VLAN
    • VLAN numbers 2 - 3999 are user-configurable
    • VLAN numbers 4000 - 4095 are reserved for the use by the switch
  • Port-based VLANs
  • Private VLANs
  • 802.1Q VLAN tagging
  • 802.1Q encapsulation on Layer 3 routed ports
  • Ingress VLAN tagging to tunnel packets through a public domain without altering the original 802.1Q tagging information
• Security:
  • VLAN-based, MAC-based, and IP-based access control lists (ACLs)
  • 802.1x port-based authentication
  • Multiple user IDs and passwords
  • User access control
  • Radius, TACACS+, and LDAP/LDAPS authentication and authorization
  • Secure mode: Only secure communication protocols can be enabled
• Quality of Service (QoS):
  • Support for IEEE 802.1p, IP ToS/DSCP, and ACL-based (MAC/IP source and destination addresses and VLANs) traffic classification and processing
  • Traffic shaping and re-marking that is based on defined policies
  • Eight output Class of Service (COS) queues per port for processing qualified traffic
  • Weighted Random Early Detection (WRED) with Explicit Congestion Notification (ECN) to avoid congestion 
  • Control Plane Protection (CoPP)
  • IPv4 ACL metering
• IP v4 Layer 3 functions:
  • Host management
  • Routed ports (Switch ports as Layer 3 interfaces)
  • IP forwarding
  • Network address translation (NAT)
  • IP filtering with ACLs
  • Virtual Router Redundancy Protocol (VRRP) for router redundancy
  • Static routes
  • Equal Cost Multiple Paths (ECMP)
  • Routing protocols (OSPF v2 and BGP-4)
  • Policy-based routing (PBR)
  • DHCP Relay and DHCP Snooping
  • IGMP snooping
  • DNS client
• IPv6 Layer 3 functions:
  • IPv6 host management
  • Routed ports (Switch ports as Layer 3 interfaces)
  • IPv6 forwarding
  • Virtual Router Redundancy Protocol (VRRP) for router redundancy
  • Static routes
  • Equal Cost Multiple Paths (ECMP)
  • Routing protocols (BGP-4)
  • DHCP Relay
  • DNS client
• Virtualization:
  • Virtual link aggregation groups (vLAGs)
    • Two switches (vLAG peers) act as a single virtual entity for a multi-port aggregation
    • vLAG Peer Gateway for improved usage of the link between the vLAG peers
    • Two-tier vLAGs with VRRP enables active/active VRRP to reduce routing latency
  • Data Center Interconnect (DCI) enables bridging of Layer 2 services across multiple locations over existing Layer 3 IP networks by using VXLAN high availability framework.
  • Virtual Routing and Forwarding (VRF) allows multiple instances (up to 64 for data traffic and one for management traffic) of a routing table to coexist and to work simultaneously on the switch to segment network paths.
  • Network Policy Agent gives increased visibility of the virtual infrastructure and automates VM-aware network provisioning and configuration updates for VLANs, virtual NICs, virtual networks, ACLs, and QoS based on the VM associations in a Nutanix (requires the AOS version 5.0.2 or higher [excluding 5.1.2]) or VMware vSphere environment.
  • VXLAN Gateway enables the communication between physical and virtual devices using the VXLAN protocol for VMware NSX integration.
  • Controller-less VXLAN for VMWare and Nutanix environments with the automated Layer 2 port provisioning provided by ThinkAgile Network Orchestrator.
• Converged Enhanced Ethernet:
  • Priority-Based Flow Control (PFC) (IEEE 802.1Qbb) extends 802.3x flow control to allow the switch to pause traffic that is based on the 802.1p priority value in each packet’s VLAN tag.
  • Enhanced Transmission Selection (ETS) (IEEE 802.1Qaz) provides a method for allocating link bandwidth that is based on the 802.1p priority value in each packet’s VLAN tag.
  • Data Center Bridging Capability Exchange Protocol (DCBX) (IEEE 802.1AB) allows neighboring network devices to exchange information about their capabilities.
• Fibre Channel over Ethernet (FCoE):
  • FC-BB5 FCoE specification compliant
  • FCoE transit switch operations
  • FCoE Initialization Protocol (FIP) support for automatic ACL configuration
  • FCoE Link Aggregation Group (LAG) support
  • 2,048 FCoE sessions with FIP Snooping by using Class ID ACLs
• Monitoring:
  • Switch LEDs for port status and switch status indication
  • Port mirroring for analyzing network traffic passing through switch
  • Change tracking and remote logging with syslog feature
  • Telemetry agent for real-time analytics: Forwarding table utilization and buffer, system, and interface statistics
  • sFlow agent for monitoring traffic in data networks (separate sFlow analyzer required elsewhere)
• Manageability:
  • Industry-standard command line interface (isCLI)
  • Simple Network Management Protocol (SNMP V1, V2, and V3)
  • Telnet interface for CLI
  • Secure Shell (SSH) v1 and v2 for CLI
  • Secure Copy (SCP) for uploading and downloading the configuration file via secure channels
  • Service Location Protocol (SLP)
  • Link Layer Discovery Protocol (LLDP) for discovering network devices
  • Serial interface for CLI
  • Scriptable CLI
  • Dynamic port mode for switching between 25 Gbps and 10 Gbps port speeds without rebooting
  • Dual software images
  • Firmware image update via TFTP, FTP, Secure FTP (sFTP), or USB storage
  • Network Time Protocol (NTP) for switch clock synchronization
  • Lenovo XClarity (optional) for discovery, inventory, monitoring and events
  • Lenovo Intelligent Network Controller (LINC) (optional) for Software-Defined Networking (SDN)
  • Third-party tools integration
    • Lenovo Networking Content Pack for VMware vRealize Log Insight (optional download) for automated log management
    • Integration with Nutanix Prism and VMware vCenter management via Network Policy Agent
    • Lenovo Networking Neutron Plugin to automate VLAN provisioning and configuration updates for OpenStack-based cloud environments
    • Integration with Ansible management
    • Ganglia plug-in for telemetry data analytics

The NE10032 RackSwitch supports the following Ethernet standards:

• IEEE 802.1AB Data Center Bridging Capability Exchange Protocol (DCBX)
• IEEE 802.1D Spanning Tree Protocol (STP)
• IEEE 802.1p Class of Service (CoS) prioritization
• IEEE 802.1s Multiple STP (MSTP)
• IEEE 802.1Q Tagged VLAN (frame tagging on all ports when VLANs are enabled)
• IEEE 802.1Qbb Priority-Based Flow Control (PFC)
• IEEE 802.1Qaz Enhanced Transmission Selection (ETS)
• IEEE 802.1x port-based authentication
• IEEE 802.1w Rapid STP (RSTP)
• IEEE 802.3 10BASE-T Ethernet
• IEEE 802.3ab 1000BASE-T copper twisted pair Gigabit Ethernet
• IEEE 802.3ad Link Aggregation Control Protocol
• IEEE 802.3ae 10GBASE-SR short range fiber optics 10 Gb Ethernet
• IEEE 802.3ba 40GBASE-SR4 short range fiber optics 40 Gb Ethernet
• IEEE 802.3ba 40GBASE-CR4 copper 40 Gb Ethernet
• IEEE 802.3ba 100GBASE-LR4 long range fiber optics 100 Gb Ethernet
• IEEE 802.3bj 100GBASE-CR4 copper 100 Gb Ethernet
• IEEE 802.3bm 100GBASE-SR4 short range fiber optics 100 Gb Ethernet
• IEEE 802.3cd 100GBASE-FR fiber optics 100 Gb Ethernet
• IEEE 802.3u 100BASE-TX Fast Ethernet
• IEEE 802.3x Full-duplex Flow Control
• SFF-8431 10 Gb SFP+ Direct attach copper cable
• SFF-8436 40 Gb QSFP+ Direct attach copper cable

The NE10032 RackSwitch ships with six variable speed, hot-swap fan assemblies that provide N+1 cooling redundancy.

The NE10032 RackSwitch supports up to two load-sharing, redundant hot-swap 770 W AC Platinum power supplies (two power supplies come standard with the switch).

The NE10032 RackSwitch ships without any power cables. The part numbers and feature codes to order the power cables (two power cables are required per switch) are listed in the following table.

* Available for factory-built custom configurations and solutions only.

The NE10032 RackSwitch ships with the 2-post rack mount kit.

For 4-post rack installations, the NE10032 RackSwitch supports the optional adjustable 19-inch, 4-post rail kit and the air inlet duct (optional for the 4-post rail kit; supported only with the models with rear to front airflow).

When the NE10032 RackSwitch (front to rear airflow) is installed in the Intelligent Cluster Rack (Machine Type 1410) or Enterprise Rack (Machine Type 9363) as a part of a NeXtScale System solution, the recessed 19-inch 4-post rail kit is required.

The following table lists rack installation options for the NE10032 RackSwitch switches with rear to front and front to rear airflow.

The NE10032 RackSwitch features the following physical specifications:

• Height: 44 mm (1.7 in.)
• Width: 441 mm (17.3 in.)
• Depth: 487 mm (19.2 in.)
• Maximum weight: 11.3 kg (24.9 lb)

The NE10032 RackSwitch is supported in the following operating environment:

• Temperature: 0 - 40 ºC (32 - 104 ºF).
• Relative humidity: 10 - 90% (Non-condensing)
• Altitude: Up to 2,000 m (6,561 feet)
• Acoustic noise: Less than 90 dB
• Airflow: Front-to-rear or rear-to-front cooling with variable speed fans for reduced power draw
• Electrical input: 50 / 60 Hz, 100 - 240 V AC auto-switching
• Power consumption
  • Typical: 212 W
  • Maximum: 436 W
• Heat dissipation
  • Typical: 723 BTU/hour
  • Maximum: 1488 BTU/hour

The NE10032 RackSwitch comes with a 3-year Customer Replaceable Unit (CRU) hardware limited warranty with 9x5 Next Business Day (NBD) Parts Delivered and includes a 3-year software license, which provides entitlement to upgrades over that period. The options that are installed in the switch assume the switch’s base warranty and any Lenovo warranty service upgrade for the switch.

Some regions might have different warranty terms and conditions than the standard warranty. This is due to local business practices or laws in the specific region. Local service teams can assist in explaining region-specific terms when needed. Examples of region-specific warranty terms are second or longer business day parts delivery or parts-only base warranty.

If warranty terms and conditions include onsite labor for repair or replacement of parts, Lenovo will dispatch a service technician to the customer site to perform the replacement. Onsite labor under base warranty is limited to labor for replacement of parts that have been determined to be field-replaceable units (FRUs). Parts that are determined to be customer-replaceable units (CRUs) do not include onsite labor under base warranty.

If warranty terms include parts-only base warranty, Lenovo is responsible for delivering only replacement parts that are under base warranty (including FRUs) that will be sent to a requested location for self-service. Parts-only service does not include a service technician being dispatched onsite. Parts must be changed at customer’s own cost and labor and defective parts must be returned following the instructions supplied with the spare parts.

Also available are Lenovo Services warranty maintenance upgrades and post-warranty maintenance agreements, with a well-defined scope of services, including service hours, response time, term of service, and service agreement terms and conditions.

Lenovo warranty service upgrade offerings are region-specific. Not all warranty service upgrades are available in every region. For information about Lenovo warranty service upgrade offerings that are available in your region, refer to the following resources:

• Service part numbers in Lenovo Data Center Solutions Configurator (DCSC):
  http://dcsc.lenovo.com/#/services
• Lenovo Services Availability Locator:
  https://lenovolocator.com/

In general, the following Lenovo warranty service upgrades are available:

• Warranty and maintenance service upgrades:
  • 3, 4, or 5 years of warranty service coverage
  • 1-year or 2-year post-warranty extensions
  • Foundation Service: 9x5 service coverage with next business day onsite response
  • Essential Service: 24x7 service coverage with 4-hour onsite response or 24-hour committed repair (available only in select regions)
  • Advanced Service: 24x7 service coverage with 2-hour onsite response or 6-hour committed repair (available only in select regions)
• Basic Hardware Installation Services

  Lenovo experts can seamlessly manage the physical installation of your server, storage, or networking hardware. Working at a time convenient for you (business hours or off shift), the technician will unpack and inspect the systems on your site, install options, mount in a rack cabinet, connect to power and network, check and update firmware to the latest levels, verify operation, and dispose of the packaging, allowing your team to focus on other priorities.

The NE10032 RackSwitch conforms to the following regulations:

• Argentina IEC60950-1
• AS/NZS CISPR 22, Class A
• Canada ICES-003, Issue 4, Class A
• CE Mark (EN55022 Class A, EN60950-1, EN55024, EN61000-3-2, and EN61000-3-3)
• China CCC GB4943, GB9254 Class A, GB17625.1
• CISPR 22, Class A
• CSA C22.2 No. 60950-1
• FCC: Verified to comply with Part 15 of the FCC Rules, Class A
• IEC 60950-1 (CB Certificate and CB Test Report)
• Japan VCCI, Class A
• Korea KN22, Class A; KN24
• NOM-019
• Russia/GOST ME01, IEC-60950-1, GOST R 51318.22, 51318.24, 51317.3.2, and 51317.3.3
• Taiwan BSMI CNS13438, Class A; CNS14336-1
• TUV-GS (EN60950-1/IEC60950-1, EK1-ITB2000)
• UL/IEC 60950-1
• Reduction of Hazardous Substances (ROHS)

The following table lists the network switches with rear-to-front airflow that are offered by Lenovo that can be used with the NE10032 RackSwitch for ThinkSystem and Flex System network connectivity.

The following table lists the external storage systems that are currently offered by Lenovo that can be used with the NE10032 RackSwitch for external NAS or iSCSI SAN storage connectivity.

* Preconfigured models that are available only in North America (part numbers that have NA at the end) or EMEA (part numbers that have EA at the end) and require Preconfigured support to be purchased with the storage system (See the respective product guide for details).

For more information, see the list of Product Guides in the Lenovo Storage category:
http://lenovopress.com/storage/san/lenovo#rt=product-guide

The following table lists the rack cabinets that are offered by Lenovo that can be used with the NE10032 RackSwitch in IT solutions.

For more information, see the list of Product Guides in the Rack cabinets category:
http://lenovopress.com/servers/options/racks?rt=product-guide

The following table lists the power distribution units (PDUs) that are offered by Lenovo that can be used with the NE10032 RackSwitch in IT solutions.

For more information, see the list of Product Guides in the Power Distribution Units category:
http://lenovopress.com/servers/options/pdu?rt=product-guide

The following table lists the uninterruptible power supply (UPS) units that are offered by Lenovo that can be used with the NE10032 RackSwitch in IT solutions.

For more information, see the list of Product Guides in the Uninterruptible Power Supply Units category:
http://lenovopress.com/servers/options/ups#rt=product-guide

Lenovo Financial Services reinforces Lenovo’s commitment to deliver pioneering products and services that are recognized for their quality, excellence, and trustworthiness. Lenovo Financial Services offers financing solutions and services that complement your technology solution anywhere in the world.

We are dedicated to delivering a positive finance experience for customers like you who want to maximize your purchase power by obtaining the technology you need today, protect against technology obsolescence, and preserve your capital for other uses.

We work with businesses, non-profit organizations, governments and educational institutions to finance their entire technology solution. We focus on making it easy to do business with us. Our highly experienced team of finance professionals operates in a work culture that emphasizes the importance of providing outstanding customer service. Our systems, processes and flexible policies support our goal of providing customers with a positive experience.

We finance your entire solution. Unlike others, we allow you to bundle everything you need from hardware and software to service contracts, installation costs, training fees, and sales tax. If you decide weeks or months later to add to your solution, we can consolidate everything into a single invoice.

Our Premier Client services provide large accounts with special handling services to ensure these complex transactions are serviced properly. As a premier client, you have a dedicated finance specialist who manages your account through its life, from first invoice through asset return or purchase. This specialist develops an in-depth understanding of your invoice and payment requirements. For you, this dedication provides a high-quality, easy, and positive financing experience.

For your region-specific offers please ask your Lenovo sales representative or your technology provider about the use of Lenovo Financial Services. For more information, see the following Lenovo website:
http://www.lenovofs.com

For more information about the NE10032 RackSwitch, see the following publications that are available at the RackSwitch InfoCenter:
http://systemx.lenovofiles.com/help/topic/com.lenovo.thinksystem.ne10032.doc/ts_ne10032.html

• Lenovo ThinkSystem NE10032 RackSwitch Installation Guide
• Lenovo ThinkSystem NE10032 RackSwitch Application Guide
• Lenovo ThinkSystem NE10032 RackSwitch REST API Guide
• Lenovo ThinkSystem NE10032 RackSwitch Python Programming Guide

The software for the NE10032 RackSwitch can be downloaded from Lenovo Data Center Support:
http://datacentersupport.lenovo.com/us/en/products/networking/rackswitch/NE10032/downloads

For more information about the following management plug-ins for the NE10032 RackSwitch, see Network Management:
http://www3.lenovo.com/us/en/data-center/networking/networking-software/network-management

• ThinkAgile Network Orchestrator
• Lenovo Networking Plug-In for VMware vRealize Orchestrator
• Lenovo Networking Content Pack for VMware vRealize Log Insight
• Lenovo Networking Bundle for VMware vRealize
• Lenovo Networking Plug-In for OpenStack Neutron
• Integration with Ansible
• Lenovo Telemetry Analytics Tool: Ganglia Plugins

For discussions on various Lenovo networking topics, visit the Data Center Networking Community Forum:
http://forums.lenovo.com/t5/Datacenter-Networking/ct-p/nh_eg