Employee Login
skip to main content

Lenovo Press

IBM Half-high LTO Generation 4 SAS Tape Drive

Product Guide (withdrawn product)

Home
Top
Updated
7 Jun 2011
Form Number
TIPS0746
PDF size
13 pages, 236 KB
Rate & Provide Feedback
Download PDF

Abstract

The IBM Half High LTO Gen 4 SAS Tape Drive is the fourth-generation Linear Tape-Open (LTO) offering introducing larger storage capacities, increased performance, and advanced security features to effectively meet the demanding backup, archival and regulatory compliance requirements of your System x environments.

The IBM Half High LTO Gen 4 SAS Tape Drive is an excellent tape storage solution for businesses requiring backup or low-cost, real-time archiving of their data within a small window of time. This fourth generation drive provides up to twice the storage capacity, up to 1.6 TB with 2:1 compression, and provides up to a 50% performance increase, up to 240 MBps (864 GB/hr) with 2:1 compression, over the preceding LTO 3 half height technology. This enterprise data protection offering is available in a 5.25-inch half-height internal form factor for integration into IBM System x tower servers and external IBM 1U rack-mount enclosures or a half-height external unit for stand-alone table top or rack shelf applications.

Introduction


The IBM Half High LTO Generation 4 SAS Tape Drive is the fourth-generation Linear Tape-Open (LTO) offering introducing larger storage capacities, increased performance, and advanced security features to effectively meet the demanding backup, archival and regulatory compliance requirements of your System x environments.

The IBM Half High LTO Generation 4 SAS Tape Drive is an excellent tape storage solution for businesses requiring backup or low-cost, real-time archiving of their data within a small window of time. This fourth generation drive provides up to twice the storage capacity, up to 1.6 TB with 2:1 compression, and provides up to a 50% performance increase, up to 240 MBps (864 GB/hr) with 2:1 compression, over the preceding LTO 3 half height technology. This enterprise data protection offering is available in a 5.25-inch half-height internal form factor for integration into IBM System x tower servers and external IBM 1U rack-mount enclosures or a half-height external unit for stand-alone table top or rack shelf applications.

Figure 1 shows the IBM Internal Half-high LTO Generation 4 SAS Tape Drive.

IBM Half-high LTO Generation 4 SAS Tape Drive
Figure 1. IBM Internal Half-high LTO Generation 4 SAS Tape Drive

Did you know?

Data security is a growing requirement for businesses of all sizes today. The IBM Half-high LTO Generation 4 SAS Tape Drive delivers advanced security features to help ensure compliancy with data security, information disclosure, and privacy regulations for data at rest. Beyond WORM (Write-Once, Read-Many) cartridge support to preserve data in a non-erasable and non-rewritable format, LTO 4 technology also offers data encryption capabilities. LTO 4 hardware-based data encryption can assist in safeguarding against costly security breaches and exposure of proprietary data if a data cartridge is stolen or lost.


Part number information

Table 1 lists the ordering part numbers and feature codes.

Table 1. Ordering part numbers and feature codes
Description Part number Feature code
IBM Internal Half-high LTO Generation 4 SAS Tape Drive 44E8895 5397
IBM External Half High LTO Gen 4 SAS Drive, with US line cord 3628L4X None
IBM External Half High LTO Gen 4 SAS Drive, with no line cord 3628N4X None
IBM LTO Generation 4 Media 5 Pack 46C5359 5701 (1 cartridge)
IBM LTO Ultrium 4 800GB WORM Data Cartridge without labels - 20 pack 95P4461* Not available
IBM LTO Universal Cleaning Cartridge 49Y9893 5347
* To order WORM cartridges, in United States and Canada, please call 1-888-IBM-MEDIA. For all other geographic locations, please select your country and distributor from http://ibm.com/systems/storage/media/distributors/.

The part number for the IBM Internal Half-high LTO Generation 4 SAS tape drive includes:
  • LTO Generation 4 SAS tape drive assembly
  • Mounting screws
  • CD-ROM containing the User's Guide
  • Cleaning cartridge
  • Drive rails
  • SAS cable for internal tape connectivity

The part numbers for the IBM External Half-high LTO Generation 4 SAS Tape Drive includes the following items:
  • LTO Generation 4 SAS tape drive in an external enclosure
  • CD-ROM containing the User's Guide
  • Cleaning cartridge
  • 3 meter external SAS cable
  • 3628L4X also includes a 2.8 meter (9 ft) 10A / 125V US line cord


Features

The features of the IBM Half-high LTO Generation 4 SAS Tape Drive has the features and benefits listed in Table 2:

Table 2. Features and benefits
Feature Benefits
6 Gbps SAS host interface
  • Fast connection to the server
Up to 240 MBps data transfer rate
  • Helps reduce the time required for backup
  • 50% transfer rate increase from current Half-high LTO Generation 3 drives
Up to 1.6 TB cartridge capacity
  • Helps store greater amounts of data as your business grows
Digital Speed Matching (DSM)
  • Supported on Ultrium 4 media in increments of 30 MBps to 120 MBps
  • Along with a larger buffer, helps to maximize drive performance when data rates are less than optimal
256 MB buffer
  • Together with Digital Speed Matching, helps the drive mitigate fluctuations in data rates
Adaptive Data Compression
  • With the 256 MB buffer, helps you achieve optimal performance and storage capacity
  • Helps improve data throughput and tape repositions
  • Helps support data integrity through synchronous, dynamic swapping of data compression scheme
256 AES encryption
  • Helps keep the data on your tape media secure with encryption
  • Helps meet compliance requirements
  • Helps improve performance of your backup processes with dedicated encryption/decryption core
16 channel head
  • Increases data throughput to support higher drive speeds
Timing-based servo positioning
  • Patented technology that provides greater precision when writing data to tape
  • Enables the drive to support the use of narrower tracks
  • With the 16 channel head, linear density of the data is increased by 31% when compared to LTO Generation 3 drives
Advanced tape loader and threader mechanism
  • Improves error recovery and provides greater reliability when loading threading and unloading tape cartridges
  • Independent loader and threader motors, coupled with positive pin retention helps retain the pin during a miss-pick and helps improve load & thread reliability
  • Designed to improve drive and media reliability
“On-the-fly” adaptive channel calibration
  • Allows the drive to adjust to variations in the media and head while calibrating the channel.
  • Helps improve data throughput rates and data integrity
Copper based chips
  • Based on IBM copper chip technology, provides improved performance while providing lower overall power consumption over previous generations of LTO drives
Superior power management
  • Enables the drive to operate in write mode and idle mode for when the drive is not in use
  • Improves heat dissipation and provides greater operational efficiency than previous-generation LTO drives
WORM support
  • WORM capable cartridges give you the option of storing vital data in a non-erasable, non-rewritable format, to meet strict regulatory requirements for data retention
  • Helps address evolving regulatory initiatives
Flexible mounting alternatives
  • Half height external SAS tape drive for a low cost and space efficient table top or shelf unit alternative to mounting a drive internally in your server.
  • 5.25 in. half high internal SAS tape drive designed for internal installation in IBM System x tower servers or external IBM 1U rackmount enclosures


Specifications

The specifications for the Half-high LTO Generation 4 SAS tape drive are (when using Ultrium 4 cartridges):
  • 6 Gbps SAS host interface
  • Up to 800 GB native capacity and up to 1600 GB in compressed mode (2:1 compression ratio)
  • 120 MBps native back-up rate and up to 240 MBps in compressed mode (2:1 compression ratio)
  • Support for WORM (write once read many) on WORM cartridge types
  • Burst data-transfer rate of 300 MBps for the SAS interface
  • 256 MB read-and-write cache
  • Read/Write compatibility with LTO Generation 3 cartridges. Read compatibility with LTO 2 and 3 cartridges
  • Support for encryption of data on Ultrium 4 cartridges


Key prerequisites

The IBM Half-high LTO Generation 4 SAS Tape Drive prerequisites are:
  • SAS controller
  • One or more LTO Generation 3 or LTO Generation 4 data cartridge (not supplied with drive option)
  • For the internal drive, an available half-height drive bay or supported external tape enclosure.


Physical specifications

The physical specifications of the IBM Internal Half-high LTO Generation 4 SAS Tape Drive are:
  • Height: 43 mm (1.75 in.)
  • Width: 149 mm (5.85 in.)
  • Depth: 210 mm (8.40 in.)
  • Weight: 1.5 kg (3 lb. 5 oz.)

The IBM External Half-high LTO Generation 4 SAS Tape Drive has the following physical specifications:
  • Height: 58 mm (2.3 in)
  • Width: 213 mm (8.4 in)
  • Depth: 332 mm (13.1 in)
  • Weight: 4.3 kg (9.5 lb)

Figure 2 shows the IBM External Half High LTO Generation 4 SAS Drive.

IBM External Half High LTO Gen 4 SAS Drive
Figure 2. IBM External Half High LTO Generation 4 SAS Drive


Operating environment

The IBM Half-high LTO Generation 4 SAS Tape Drive is supported in the following environment:
  • Temperature:
    • Operating: 10° to 40° degrees C (50° to 104° degrees F)
    • Non-operating: -40° to 60°C (-40° to 140°F)
  • Relative humidity:
    • Operating: 20% to 80% (non-condensing)
    • Non-operating: 10% to 90% (non-condensing)
  • Maximum altitude:
    • Operating: 3048 m (10000 ft.)
    • Non-operating: 3048 m (10000 ft.)


Warranty

The IBM Internal Half-high LTO Generation 4 SAS tape drive has a one-year limited warranty. When installed in a System x server, this tape drive assumes your system's base warranty and any IBM ServicePack upgrade. The IBM External Half-high LTO Generation 4 SAS Tape Drive has a three-year warranty.


Supported servers

The IBM Half-high LTO Generation 4 SAS Tape Drive is supported in the IBM System x servers that we listed in Table 3.

Table 3. Supported System x servers (Part 1)
x3100 M3 x3200 M2 x3200 M3 x3250 M2 x3250 M3 x3350 x3400 x3400 M2 3.115C.gif x3455 x3500 x3500 M2 3.34AC.gif

Internal LTO 4 SAS Tape Drive (installed internally to the server)
N
Y*
Y
N
N
N
Y
Y
Y
N
Y
Y
Y

Internal LTO 4 SAS Tape Drive (installed externally in an enclosure)
N
Y*
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y

External LTO 4 SAS Tape Drive
N
N
Y
Y
Y
Y
N
Y
Y
Y
N
Y
Y
* The tape drive is supported in x3200 M2 machine types 4367 and 4368 only.

Table 3. Supported System x servers (Part 2)
x3550 M2 x3550 M3 x3620 M3 x3630 M3 x3650 x3650 M2 x3650 M3 x3655 x3690 X5 x3755 x3755 M3 x3850 M2 x3950 M2 x3850 X5

Internal LTO 4 SAS Tape Drive (installed internally to the server)
N
N
N
N
N
N
N
N
N
N
N
N
N
N

Internal LTO 4 SAS Tape Drive (installed externally in an enclosure)
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
Y
Y

External LTO 4 SAS Tape Drive
Y
Y
Y
Y
Y
Y
Y
N
Y
Y
N
Y
Y
Y

Internal use

The following components are needed:
  • A supported SAS host bus adapter installed in the server (see Table 3)
  • An available 5.25-inch, half-height bay

External use

If the internal tape drive is to be installed in an external enclosure, the following components are needed. We describe these enclosures and the enclosure adapter kit in the "Supported enclosures and enclosure kit" section.
  • A supported SAS host bus adapter installed in the server (see Table 3)
  • A supported external enclosure:
    • IBM 1U Rackmount Tape Enclosure
    • IBM 4U Rackmount Tape Enclosure (now withdrawn)
    • IBM Half High Tabletop Tape Enclosure
  • An IBM SAS Enclosure Adapter Kit (40K2599)

If the external tape drive is to be used, the a supported SAS host bus adapter installed in the server is needed. The host bus adapters supported with the tape drive are listed in Table 4.

Table 4. Host Bus Adapters for use with the IBM Half-high LTO Generation 4 SAS Tape Drive

Description
Part number
Feature code

IBM SAS HBA Controller
25R8060
1681

IBM 3 Gb SAS HBA Controller v2
44E8700
3583

IBM 6Gb SAS HBA Controller
46M0907
3875

For the latest and most accurate compatibility information, visit our ServerProven Web site at: http://ibm.com/servers/eserver/serverproven/compat/us/ or the IBM System x Configuration and Options Guide at: http://www.ibm.com/systems/xbc/cog/.

Supported enclosures and enclosure kit

You can use the enclosures and enclosure kit shown in Table 5 with the internal tape drive when it is to be installed externally.

Table 5. Enclosures for use with the IBM Internal Half-high LTO Generation 4 SAS Tape Drive

Description
Part number
Feature code

IBM 1U Rack-mount Tape Enclosure
87651UX (AG)*
87651NX (AP and EMEA)†
8765HC1 fc 2290

IBM 4U Rack-mount Tape Enclosure (withdrawn)
87664UX (AG)*
8766NX (AP and EMEA)†
Not applicable

IBM Half High Tabletop Tape Enclosure
8767HHX (AG)*
8767HNX (AP and EMEA)†
8767HC1 fc 2287

IBM SAS Enclosure Adapter Kit‡
40K2599
5382
* These models are for customers in the Americas Group (AG - Canada, U.S., and countries in South America). These models ship with a NEMA 5-15P line cord
† These models are for customers in the countries known collectively as Asia Pacific (AP) and Europe, Middle East, Africa (EMEA). These models do not ship with a line cord.
‡ One adapter kit is needed per drive

The following figure shows the IBM Half-high LTO Generation 4 SAS Tape Drive installed in the left most bay of the IBM 1U Rack-mount Tape Enclosure (87651UX).
IBM Half-high Generation 4 SAS Tape Drive installed in the left most bay of the 1U Rackmount Tape Enclosure
Figure 3. The tape drive installed in the 1U Rack-mount Tape Enclosure

The IBM SAS Enclosure Adapter Kit, 40K2599, includes the following items:
  • SAS adapter/connector
  • 3M external SAS cable


Supported software products

The IBM Half-high LTO Generation 3 SAS Tape Drive supports the following software products:
  • CA Brighstor
  • Tivoli Storage Manager
  • Symantec Backup Exec
  • Symantec Net Backup


Supported operating systems

The IBM Half-high LTO Generation 3 SAS Tape Drive supports the following operating systems:
  • SUSE Linux
  • Red Hat Linux
  • Microsoft Windows 2003
  • Microsoft Windows 2008

For the latest information about the specific versions and service packs that are supported, see IBM ServerProven at:
http://ibm.com/servers/eserver/serverproven/compat/us/

When you arrive at the IBM ServerProven site, select the blade server and then select the expansion card to see the supported operating systems.


Related product families

Product families related to this document are the following:

Trademarks

Lenovo and the Lenovo logo are trademarks or registered trademarks of Lenovo in the United States, other countries, or both. A current list of Lenovo trademarks is available on the Web at https://www.lenovo.com/us/en/legal/copytrade/.

The following terms are trademarks of Lenovo in the United States, other countries, or both:
Lenovo®
ServerProven®
System x®

The following terms are trademarks of other companies:

Linux® is the trademark of Linus Torvalds in the U.S. and other countries.

Microsoft® and Windows® are trademarks of Microsoft Corporation in the United States, other countries, or both.

Other company, product, or service names may be trademarks or service marks of others.

[]
© 2024 Lenovo. All rights reserved.
Privacy Site Map Terms of Use External Submission Policy Sales terms and conditions Anti-Slavery and Human Trafficking Statement