skip to main content

Mellanox ConnectX-2 VPI Single-port and Dual-port QDR InfiniBand Host Channel Adapters

Product Guide (withdrawn product)

Home
Top
Author
Updated
5 Nov 2014
Form Number
TIPS0778
PDF size
9 pages, 208 KB

Abstract

High-performance computing (HPC) solutions require high bandwidth, low latency components with CPU offloads to get the highest server efficiency and application productivity. The Mellanox ConnectX-2 VPI Single-port and Dual-port QDR InfiniBand host channel adapters (HCAs) deliver the I/O performance that meets these requirements. Data centers and cloud computing also require I/O services such as bandwidth, consolidation and unification, and flexibility, and the Mellanox HCAs support the necessary LAN and SAN traffic consolidation.

Note: These adapters have been withdrawn from marketing.

Introduction

High-performance computing (HPC) solutions require high bandwidth, low latency components with CPU offloads to get the highest server efficiency and application productivity. The Mellanox ConnectX-2 VPI Single-port and Dual-port Quad Data Rate (QDR) InfiniBand host channel adapters (HCAs) deliver the I/O performance that meets these requirements. Data centers and cloud computing also require I/O services such as bandwidth, consolidation and unification, and flexibility, and the Mellanox HCAs support the necessary LAN and SAN traffic consolidation.

Figure 1 shows the Mellanox ConnectX-2 VPI Dual-port QDR InfiniBand host channel adapter.

Mellanox ConnectX-2 VPI Dual-port QDR InfiniBand host channel adapter
Figure 1. Mellanox ConnectX-2 VPI Dual-port QDR InfiniBand host channel adapter

Did you know?

Mellanox ConnectX-2 VPI Single-port and Dual-port QDR InfiniBand host channel adapters make it possible for any standard networking, clustering, storage, and management protocol to seamlessly operate over any converged network by using a consolidated software stack. With auto-sense capability, each ConnectX-2 port can identify and operate on InfiniBand, Ethernet, or Data Center Bridging (DCB) fabrics. ConnectX-2 with Virtual Protocol Interconnect (VPI) simplifies I/O system design and makes it easier for IT managers to deploy an infrastructure that meets the challenges of a dynamic data center.
 

Part number information

Table 1 shows the part numbers and feature codes for the Mellanox ConnectX-2 VPI QDR InfiniBand HCAs.

Table 1. Ordering part numbers and feature codes

Part number Feature code Description
81Y1531* 5446 Mellanox ConnectX-2 VPI Single-port QSFP QDR IB/10GbE PCI-E 2.0 HCA
81Y1535* 5447 Mellanox ConnectX-2 VPI Dual-port QSFP QDR IB/10GbE PCI-E 2.0 HCA

* Withdrawn from marketing

The adapters support the transceivers and direct-attach copper (DAC) twin-ax cables listed in Table 2.

Table 2. Supported transceivers and DAC cables

Part number Feature code Description
59Y1920 3731 3m QLogic Optical QDR InfiniBand QSFP Cable
59Y1924 3732 10m QLogic Optical QDR InfiniBand QSFP Cable
59Y1928 3733 30m QLogic Optical QDR InfiniBand QSFP Cable
59Y1892 3725 0.5m QLogic Copper QDR InfiniBand QSFP 30AWG Cable
59Y1896 3726 1m QLogic Copper QDR InfiniBand QSFP 30AWG Cable
59Y1900 3727 3m QLogic Copper QDR InfiniBand QSFP 28AWG Cable
49Y0488 5989 3m Optical QDR InfiniBand QSFP Cable
49Y0491 5990 10m Optical QDR InfiniBand QSFP Cable
49Y0494 5991 30m Optical QDR InfiniBand QSFP Cable

Figure 2 shows the Mellanox ConnectX-2 VPI Single-port QDR InfiniBand host channel adapter.

Mellanox ConnectX-2 VPI Single-port QDR InfiniBand host channel adapter

Figure 2. Mellanox ConnectX-2 VPI Single-port QDR InfiniBand host channel adapter

Features and benefits

The Mellanox ConnectX-2 VPI Single-port and Dual-port QDR InfiniBand host channel adapters have the following features:

InfiniBand

ConnectX-2 delivers low latency, high bandwidth, and computing efficiency for performance-driven server and storage clustering applications. Efficient computing is achieved by offloading from the CPU routine activities, which makes more processor power available for the application. Network protocol processing and data movement impacts, such as InfiniBand RDMA and Send/Receive semantics, are completed in the adapter without CPU intervention. Graphical processing unit (GPU) communication acceleration provides additional efficiencies by eliminating unnecessary internal data copies, which significantly reduces application runtime. The ConnectX-2 advanced acceleration technology enables higher cluster efficiency and scalability of up to tens of thousands of nodes.

RDMA over converged Ethernet

ConnectX-2 utilizes the InfiniBand Trade Association's RDMA over Converged Ethernet (RoCE) technology to deliver similar low-latency and high-performance over Ethernet networks. Leveraging Data Center Bridging capabilities, RoCE provides efficient low latency RDMA services over Layer 2 Ethernet. The RoCE software stack maintains existing and future compatibility with bandwidth and latency sensitive applications. With link-level interoperability in the existing Ethernet infrastructure, network administrators can use existing data center fabric management solutions.

TCP/UDP/IP acceleration

Applications utilizing TCP/UDP/IP transport can achieve industry leading throughput over InfiniBand or 10 GbE adapters. The hardware-based stateless offload engines in ConnectX-2 reduce the CPU impact of IP packet transport, allowing more processor cycles to work on the application.

I/O virtualization

ConnectX-2 with Virtual Intelligent Queuing (Virtual-IQ) technology provides dedicated adapter resources and guaranteed isolation and protection for virtual machines within the server. I/O virtualization with ConnectX-2 gives data center managers better server utilization and LAN and SAN unification while reducing cost, power, and cable complexity.

Storage accelerated

A consolidated compute and storage network achieves significant cost-performance advantages over multi-fabric networks. Standard block and file access protocols can use InfiniBand RDMA for high-performance storage access. T11 compliant encapsulation (FCoIB or FCoE) with full hardware offload simplifies the storage network while keeping existing Fibre Channel targets.

Software support

All Mellanox adapter cards are supported by a full suite of drivers for Microsoft Windows, Linux distributions, VMware, and Citrix XENServer. ConnectX-2 VPI adapters support OpenFabrics-based RDMA protocols and software. Stateless offload is fully interoperable with standard TCP/ UDP/IP stacks. ConnectX-2 VPI adapters are compatible with configuration and management tools from OEMs and operating system vendors.

Specifications

The adapters have the following specifications:

  • Low-profile adapter form factor
  • Ports: One or two 40 Gbps InfiniBand interfaces (40/20/10 Gbps auto-negotiation) with QSFP connectors
  • ASIC: Mellanox ConnectX-2
  • Host interface: PCI Express 2.0 x8 (5.0 GTps)
  • Interoperable with InfiniBand or 10G Ethernet switches

InfiniBand specifications:

  • IBTA Specification 1.2.1 compliant
  • RDMA, Send/Receive semantics
  • Hardware-based congestion control
  • 16 million I/O channels
  • 256 to 4 KB MTU, 1 GB messages
  • Nine virtual lanes: Eight data and one management

Enhanced InfiniBand specifications:

  • Hardware-based reliable transport
  • Hardware-based reliable multicast
  • Extended Reliable Connected transport
  • Enhanced Atomic operations
  • Fine grained end-to-end quality of server (QoS)

Ethernet specifications:

  • IEEE 802.3ae 10Gb Ethernet
  • IEEE 802.3ad Link Aggregation and Failover
  • IEEE 802.1Q, 1p VLAN tags and priority
  • IEEE P802.1au D2.0 Congestion Notification
  • IEEE P802.1az D0.2 ETS
  • IEEE P802.1bb D1.0 Priority-based Flow Control
  • Multicast
  • Jumbo frame support (10 KB)
  • 128 MAC/VLAN addresses per port

Hardware-based I/O virtualization:

  • Address translation and protection
  • Multiple queues per virtual machine
  • VMware NetQueue support

Additional CPU offloads:

  • TCP/UDP/IP stateless offload
  • Intelligent interrupt coalescence
  • Compliant with Microsoft RSS and NetDMA

Storage support:

  • Fibre Channel over InfiniBand ready
  • Fibre Channel over Ethernet ready

Management and tools:

InfiniBand:

  • OpenSM
  • Interoperable with third-party subnet managers
  • Firmware and debug tools (MFT and IBDIAG)

Ethernet:

  • MIB, MIB-II, MIB-II Extensions, RMON, and RMON 2
  • Configuration and diagnostic tools

Protocol support:

  • Open MPI, OSU MVAPICH, Intel MPI, MS MPI, and Platform MPI
  • TCP/UDP, EoIB, IPoIB, SDP, and RDS
  • SRP, iSER, NFS RDMA, FCoIB, and FCoE
  • uDAPL

Physical specifications

The adapters have the following physical specifications (without the bracket):

  • Single port: 2.1 in x 5.6 in (54 mm x 142 mm)
  • Dual port: 2.7 in. x 6.6 in. (69 mm x 168 mm)

Operating environment

The adapters are supported in the following environment:

Operating temperature: 0 to 55° C
Air flow: 200 LFM at 55° C

Power consumption (typical):

  • Single-port adapter: 7.0 W typical
  • Dual-port adapter: 8.8 W typical (both ports active)

Power consumption (maximum):

  • Single-port adapter: 7.7W maximum for passive cables only; 9.7W maximum for active optic modules
  • Dual-port adapter: 9.4W maximum for passive cables only, 13.4W maximum for active optic modules

Warranty

One year limited warranty. When installed in an System x server, these cards assume your system’s base warranty and any warranty upgrades.
 

Supported servers

The adapters are supported in the System x servers listed in Table 3.

Table 3. Server compatibility, part 1 (M5 systems and M4 systems with v2 processors)

M5 systems
(v3 processors)
M4 and X6 systems (v2 processors)
Part
number
Description x3100 M5 (5457) x3250 M5 (5458) x3550 M5 (5463) x3650 M5 (5462) nx360 M5 (5465) x3500 M4 (7383, E5-2600 v2) x3630 M4 (7158, E5-2400 v2) x3550 M4 (7914, E5-2600 v2) 4.1704.jpg x3650 M4 (7915, E5-2600 v2) 4.2DFC.jpg x3650 M4 HD (5460) 4.411C.jpg x3850 X6/x3950 X6 (3837) dx360 M4 (7912, E5-2600 v2) nx360 M4 (5455)
81Y1531 Mellanox ConnectX-2 VPI Single-port QSFP QDR IB/10GbE PCI-E 2.0 HCA N N N N N N N N N N N N N N N N
81Y1535 Mellanox ConnectX-2 VPI Dual-port QSFP QDR IB/10GbE PCI-E 2.0 HCA N N N N N N N N N N N N N N N N

Table 3. Server compatibility, part 2 (M4 systems with v1 processors and M3 systems)

M4 and X5 systems (v1 processors)
M3 systems
Part
number
Description x3100 M4 (2582) x3250 M4 (2583) x3300 M4 (7382) x3500 M4 (7383, E5-2600) x3530 M4 (7160) x3550 M4 (7914, E5-2600) x3630 M4 (7158) x3650 M4 (7915, E5-2600) x3690 X5 (7147) x3750 M4 (8722) x3850 X5 (7143) dx360 M4 (7912, E5-2600) x3200 M3 (7327, 7328) x3250 M3 (4251, 4252) x3400 M3 (7378, 7379) x3500 M3 (7380) x3550 M3 (7944) x3620 M3 (7376) x3630 M3 (7377) x3650 M3 (7945) x3755 M3 (7164) dx360 M3 (6391)
81Y1531 Mellanox ConnectX-2 VPI Single-port QSFP QDR IB/10GbE PCI-E 2.0 HCA N N N N N N N N Y N Y N N N N N Y N N N Y N
81Y1535 Mellanox ConnectX-2 VPI Dual-port QSFP QDR IB/10GbE PCI-E 2.0 HCA N N N N N N N N N N N N N N N N N N N N N N

Supported operating systems

The adapters support the following operating systems:

  • SUSE Linux Enterprise Server (SLES) 10 and 11
  • Red Hat Enterprise Linux (RHEL) 4, 5.3, 5.4
  • Microsoft Windows Server 2003
  • Microsoft Compute Cluster Server 2003
  • Microsoft Windows Server 2008
  • Microsoft Windows HPC Server 2008
  • OpenFabrics Enterprise Distribution (OFED)
  • OpenFabrics Windows Distribution (WinOF)
  • VMware ESX Server 3.5/vSphere 4.0

Related product families

Product families related to this document are the following:

Trademarks

Lenovo and the Lenovo logo are trademarks or registered trademarks of Lenovo in the United States, other countries, or both. A current list of Lenovo trademarks is available on the Web at https://www.lenovo.com/us/en/legal/copytrade/.

The following terms are trademarks of Lenovo in the United States, other countries, or both:
Lenovo®
System x®

The following terms are trademarks of other companies:

Intel® is a trademark of Intel Corporation or its subsidiaries.

Linux® is the trademark of Linus Torvalds in the U.S. and other countries.

Microsoft®, Windows Server®, and Windows® are trademarks of Microsoft Corporation in the United States, other countries, or both.

Other company, product, or service names may be trademarks or service marks of others.