Top
Author
Updated
1 Aug 2024Form Number
LP1195PDF size
27 pages, 594 KBSubscribed to LP1195.
Thank you for your feedback.
Table of Contents
Abstract
The ThinkSystem Mellanox ConnectX-6 HDR/200GbE VPI Adapters offer 200 Gb/s Ethernet and InfiniBand connectivity for high-performance connectivity when running HPC, cloud, storage and machine learning applications.
This product guide provides essential presales information to understand the adapter and its key features, specifications, and compatibility. This guide is intended for technical specialists, sales specialists, sales engineers, IT architects, and other IT professionals who want to learn more about the ConnectX-6 HDR VPI adapters and consider their use IT solutions.
Change History
Changes in the August 1, 2024 update:
- Added information about factory preload support for operating systems - Operating system support section
Introduction
The ThinkSystem Mellanox ConnectX-6 HDR/200GbE VPI Adapters offer 200 Gb/s Ethernet and InfiniBand connectivity for high-performance connectivity when running HPC, cloud, storage and machine learning applications.
The following figure shows the ThinkSystem Mellanox ConnectX-6 HDR/200GbE QSFP56 1-port PCIe 4 VPI Adapter connected to the ThinkSystem Mellanox HDR/200GbE Aux Adapter (the standard heat sink has been removed in this photo).
Figure 1. ThinkSystem Mellanox ConnectX-6 HDR/200GbE QSFP56 1-port PCIe 4 VPI Adapter (right) and ThinkSystem Mellanox HDR/200GbE Aux Adapter (left)
Did you know?
Mellanox ConnectX-6 brings new acceleration engines for maximizing High Performance, Machine Learning, Storage, Web 2.0, Cloud, Data Analytics and Telecommunications platforms. ConnectX-6 HDR adapters support up to 200 Gb/s total bandwidth at sub-600 nanosecond latency, and NVMe over Fabric offloads, providing the highest performance and most flexible solution for the most demanding applications and markets. ThinkSystem servers with Mellanox adapters and switches deliver the most intelligent fabrics for High Performance Computing clusters.
Part number information
For servers with support for PCIe 4.0 host interfaces, the ConnectX-6 HDR adapter can be used by itself in a single PCIe 4.0 x16 slot to provide 200 Gb/s connectivity. For servers with PCIe 3.0 interfaces, the ConnectX-6 HDR adapter is used in conjunction with the Aux adapter. The HDR adapter and the Aux adapter are connected together via a cable (included with the Aux adapter) and their combined host interfaces of PCIe 3.0 x32 provides enough bandwidth for 200 Gb/s connectivity.
The following table shows the part numbers for the adapters.
CTO orders: For configure-to-order builds, these adapters are only available when you select one of the HPC & AI modes in the DCSC configurator. Not available in General Purpose mode of DCSC.
Part number 4C57A15326 includes the following:
- One Mellanox adapter with full-height (3U) adapter bracket attached
- Low-profile (2U) adapter bracket
- Documentation
Part number 4C57A14179 includes the following:
- One Mellanox adapter with full-height (3U) adapter bracket attached
- Low-profile (2U) adapter bracket
- 350mm cable
- Documentation
Note: 4C57A15326 was previously named ThinkSystem Mellanox ConnectX-6 HDR QSFP56 1-port PCIe 4 InfiniBand Adapter
Supported transceivers and cables
The adapter has an empty QSFP56 cage for connectivity.
The following table lists the supported transceivers.
Configuration notes:
- Transceiver AV1D also supports 40Gb when installed in a Mellanox adapter.
- For the transceiver and cable support for the Mellanox QSA 100G to 25G Cable Adapter (4G17A10853), see the 25G Cable Adapter transceiver and cable support section.
The following table lists the supported fiber optic cables and Active Optical Cables.
The following table lists the supported direct-attach copper (DAC) cables.
25G Cable Adapter transceiver and cable support
The Mellanox QSA 100G to 25G Cable Adapter (4G17A10853) supports the transceivers listed in the following table.
The Mellanox QSA 100G to 25G Cable Adapter (4G17A10853) supports the fiber optic cables and Active Optical Cables listed in the following table.
The Mellanox QSA 100G to 25G Cable Adapter (4G17A10853) supports the direct-attach copper (DAC) cables listed in the following table.
Features
Machine learning and big data environments
Data analytics has become an essential function within many enterprise data centers, clouds and hyperscale platforms. Machine learning relies on especially high throughput and low latency to train deep neural networks and to improve recognition and classification accuracy. ConnectX-6 offers an excellent solution to provide machine learning applications with the levels of performance and scalability that they require.
ConnectX-6 utilizes the RDMA technology to deliver low-latency and high performance. ConnectX-6 enhances RDMA network capabilities even further by delivering end-to-end packet level flow control.
Security
ConnectX-6 block-level encryption offers a critical innovation to network security. As data in transit is stored or retrieved, it undergoes encryption and decryption. The ConnectX-6 hardware offloads the IEEE AES-XTS encryption/decryption from the CPU, saving latency and CPU utilization. It also guarantees protection for users sharing the same resources through the use of dedicated encryption keys.
By performing block-storage encryption in the adapter, ConnectX-6 excludes the need for self-encrypted disks. This allows customers the freedom to choose their preferred storage device, including those that traditionally do not provide encryption. ConnectX-6 can support Federal Information Processing Standards (FIPS) compliance.
ConnectX-6 also includes a hardware Root-of-Trust (RoT), which uses HMAC relying on a device-unique key. This provides both a secure boot as well as cloning-protection. Delivering best-in-class device and firmware protection, ConnectX-6 also provides secured debugging capabilities, without the need for physical access.
Storage environments
NVMe storage devices offer very fast access to storage media. The evolving NVMe over Fabric (NVMe-oF) protocol leverages RDMA connectivity to remotely access NVMe storage devices efficiently, while keeping the end-to-end NVMe model at lowest latency. With its NVMe-oF target and initiator offloads, ConnectX-6 brings further optimization to NVMe-oF, enhancing CPU utilization and scalability.
Cloud and Web 2.0 environments
Telco, Cloud and Web 2.0 customers developing their platforms on software-defined network (SDN) environments are leveraging the Virtual Switching capabilities of server operating systems to enable maximum flexibility in the management and routing protocols of their networks.
Open V-Switch (OVS) is an example of a virtual switch that allows virtual machines to communicate among themselves and with the outside world. Software-based virtual switches, traditionally residing in the hypervisor, are CPU intensive, affecting system performance and preventing full utilization of available CPU for compute functions.
To address such performance issues, ConnectX-6 offers Mellanox Accelerated Switching and Packet Processing (ASAP2) Direct technology. ASAP2 offloads the vSwitch/vRouter by handling the data plane in the NIC hardware while maintaining the control plane unmodified. As a result, significantly higher vSwitch/vRouter performance is achieved minus the associated CPU load.
The vSwitch/vRouter offload functions supported by ConnectX-5 and ConnectX-6 include encapsulation and de-capsulation of overlay network headers, as well as stateless offloads of inner packets, packet headers re-write (enabling NAT functionality), hairpin, and more.
In addition, ConnectX-6 offers intelligent flexible pipeline capabilities, including programmable flexible parser and flexible match-action tables, which enable hardware offloads for future protocols.
Socket Direct
Mellanox’s Socket Direct technology improves the performance of dual-socket servers in numerous ways, such as by enabling each of their CPUs to access the network through a dedicated PCIe interface. As the connection from each CPU to the network bypasses the QPI (UPI) and the second CPU, Socket Direct reduces latency and CPU utilization. Moreover, each CPU handles only its own traffic (and not that of the second CPU), thus optimizing CPU utilization even further.
Socket Direct also enables GPUDirect RDMA for all CPU/GPU pairs by ensuring that GPUs are linked to the CPUs closest to the adapter card. Socket Direct enables Intel DDIO optimization on both sockets by creating a direct connection between the sockets and the adapter card.
Socket Direct technology is enabled by a main card housing the ConnectX-6 and an auxiliary PCIe card bringing in the remaining PCIe lanes. The ConnectX-6 Socket Direct card is installed into two PCIe x16 slots and connected using the supplied 350mm cable.
The two PCIe x16 slots may also be connected to the same CPU. In this case, the main advantage of the technology lies in delivering 200Gb/s to servers with PCIe Gen3-only support.
SharedIO
An implementation of Sockets Direct is SharedIO (Shared I/O), where a Mellanox VPI adapter is installed in one slot in one server and an auxiliary adapter is installed in a slot in second server in the same enclosure.
The result is that the two servers or processors share the network connection of the VPI adapter with significant savings both in the cost of the adapters but also the cost of switch ports.
The following figure shows the Mellanox SharedIO Adapter and Auxiliary Card installed in two ThinkSystem SD650 V2 servers in the same tray.
Figure 2. SharedIO adapters installed in the two SD650 V2 servers on a tray
Technical specifications
The adapters have the following technical specifications.
Form factor
- Single-slot low-profile main adapter (6.6-inch x 2.71 in.)
- Single-slot low-profile auxilary adapter
PCI Express Interface
- Supports PCIe 4.0 or PCIe 3.0
- In PCIe 4.0 servers, the ConnectX-6 adapter is used by itself to connect 16 PCIe lanes. For two-socket servers, the adapter can be used with the Aux adapter to enable the Socket Direct feature.
- In PCIe 3.0 servers, the ConnectX-6 adapter is used with the Aux adapter to connect 32 PCIe lanes. For two-socket servers, the adapter can be used with the Aux adapter to enable the Socket Direct feature.
- PCIe Atomic
- TLP (Transaction Layer Packet) Processing Hints (TPH)
- PCIe switch Downstream Port Containment (DPC) enablement for PCIe hot-plug
- Advanced Error Reporting (AER)
- Access Control Service (ACS) for peer-to-peer secure communication
- Process Address Space ID (PASID) Address Translation Services (ATS)
- IBM CAPIv2 (Coherent Accelerator Processor Interface)
- Support for MSI/MSI-X mechanisms
Connectivity
- One QSFP56 port
- Supports passive copper cables with ESD protection
- Powered connectors for optical and active cable support
InfiniBand
- Supports interoperability with InfiniBand switches (up to HDR, as 4 lanes of 50Gb/s data rate)
- Total connectivity is 200 Gb/s:
- One port adapter supports a single 200 Gb/s link
- HDR / HDR100 / EDR / FDR / QDR / DDR / SDR
- IBTA Specification 1.3 compliant
- RDMA, Send/Receive semantics
- Hardware-based congestion control
- Atomic operations
- 16 million I/O channels
- 256 to 4Kbyte MTU, 2Gbyte messages
- 8 virtual lanes + VL15
Ethernet (requires firmware 20.28.1002 or later)
- Support interoperability with Ethernet switches (up to 200GbE, as 4 lanes of 50Gb/s data rate)
- Total connectivity is 200 Gb/s:
- One port adapter supports a single 200 Gb/s link
- Supports 200 GbE / 100GbE / 50GbE / 40GbE / 25GbE / 10GbE / 1GbE
- IEEE 802.3bj, 802.3bm 100 Gigabit Ethernet
- IEEE 802.3by, Ethernet Consortium 25, 50 Gigabit Ethernet, supporting all FEC modes
- IEEE 802.3ba 40 Gigabit Ethernet
- IEEE 802.3ae 10 Gigabit Ethernet
- IEEE 802.3az Energy Efficient Ethernet
- IEEE 802.3ap based auto-negotiation and KR startup
- IEEE 802.3ad, 802.1AX Link Aggregation
- IEEE 802.1Q, 802.1P VLAN tags and priority
- IEEE 802.1Qau (QCN) – Congestion Notification
- IEEE 802.1Qaz (ETS)
- IEEE 802.1Qbb (PFC)
- IEEE 802.1Qbg
- IEEE 1588v2
- Jumbo frame support (9.6KB)
- IPv4 (RFQ 791)
- IPv6 (RFC 2460)
Enhanced Features
- Hardware-based reliable transport
- Collective operations offloads
- Vector collective operations offloads
- PeerDirect RDMA (GPUDirect) communication acceleration
- 64/66 encoding
- Enhanced Atomic operations
- Advanced memory mapping support, allowing user mode registration and remapping of memory (UMR)
- Extended Reliable Connected transport (XRC)
- Dynamically Connected transport (DCT)
- On demand paging (ODP)
- MPI Tag Matching
- Rendezvous protocol offload
- Out-of-order RDMA supporting Adaptive Routing
- Burst buffer offload
- In-Network Memory registration-free RDMA memory access
CPU Offloads
- RDMA over Converged Ethernet (RoCE)
- TCP/UDP/IP stateless offload
- LSO, LRO, checksum offload
- RSS (also on encapsulated packet), TSS, HDS, VLAN and MPLS tag insertion/stripping, Receive flow steering
- Data Plane Development Kit (DPDK) for kernel bypass applications
- Open VSwitch (OVS) offload using ASAP2
- Flexible match-action flow tables
- Tunneling encapsulation / de-capsulation
- Intelligent interrupt coalescence
- Header rewrite supporting hardware offload of NAT router
Storage Offloads
- Block-level encryption: XTS-AES 256/512 bit key
- NVMe over Fabric offloads for target machine
- Erasure Coding offload - offloading Reed-Solomon calculations
- T10 DIF - signature handover operation at wire speed, for ingress and egress traffic
- Storage Protocols: SRP, iSER, NFS RDMA, SMB Direct, NVMe-oF
Overlay Networks
- RoCE over overlay networks
- Stateless offloads for overlay network tunneling protocols
- Hardware offload of encapsulation and decapsulation of VXLAN, NVGRE, and GENEVE overlay networks
Hardware-Based I/O Virtualization
- Single Root IOV
- Address translation and protection
- VMware NetQueue support
- SR-IOV: Up to 512 Virtual Functions
- SR-IOV: Up to 16 Physical Functions per host
- Virtualization hierarchies (network partitioning, NPAR)
- Virtualizing Physical Functions on a physical port
- SR-IOV on every Physical Function
- Configurable and user-programmable QoS
- Guaranteed QoS for VMs
HPC Software Libraries
- HPC-X, OpenMPI, MVAPICH, MPICH, OpenSHMEM, PGAS and varied commercial packages
Management and Control
- NC-SI, MCTP over SMBus and MCTP over PCIe - BMC interface
- PLDM for Monitor and Control DSP0248
- PLDM for Firmware Update DSP0267
- SDN management interface for managing the eSwitch
- I2C interface for device control and configuration
- General Purpose I/O pins
- SPI interface to Flash
- JTAG IEEE 1149.1 and IEEE 1149.6
Remote Boot
- Remote boot over InfiniBand
- Remote boot over Ethernet
- Remote boot over iSCSI
- Unified Extensible Firmware Interface (UEFI)
- Pre-execution Environment (PXE)
NVIDIA Unified Fabric Manager
NVIDIA Unified Fabric Manager (UFM) is InfiniBand networking management software that combines enhanced, real-time network telemetry with fabric visibility and control to support scale-out InfiniBand data centers.
The two offerings available from Lenovo are as follows:
- UFM Telemetry for Real-Time Monitoring
The UFM Telemetry platform provides network validation tools to monitor network performance and conditions, capturing and streaming rich real-time network telemetry information, application workload usage, and system configuration to an on-premises or cloud-based database for further analysis.
- UFM Enterprise for Fabric Visibility and Control
The UFM Enterprise platform combines the benefits of UFM Telemetry with enhanced network monitoring and management. It performs automated network discovery and provisioning, traffic monitoring, and congestion discovery. It also enables job schedule provisioning and integrates with industry-leading job schedulers and cloud and cluster managers, including Slurm and Platform Load Sharing Facility (LSF).
The following table lists the subscription licenses available from Lenovo.
For more information, see the following web page:
https://www.nvidia.com/en-us/networking/infiniband/ufm/
Server support
The following servers offer a PCIe 4.0 host interface. All other supported servers have a PCIe 3.0 host interface.
- ThinkSystem SR635
- ThinkSystem SR655
- ThinkSystem SR645
- ThinkSystem SR665
The following tables list the ThinkSystem servers that are compatible.
Operating system support
The following table indicates which operating systems can be preloaded in the Lenovo factory for CTO server orders where this adapter is included in the server configuration.
Tip: If an OS is listed as "No support" above, but it is listed in one of the support tables below, that means the OS is supported by the adapter, just not available to be preloaded in the Lenovo factory in CTO orders.
The adapters support the operating systems listed in the following tables.
- ThinkSystem Mellanox ConnectX-6 HDR/200GbE QSFP56 1-port PCIe 4 VPI Adapter, 4C57A15326
- ThinkSystem Mellanox HDR/200GbE 2x PCIe Aux Kit, 4C57A14179
Tip: These tables are automatically generated based on data from Lenovo ServerProven.
1 IONG-11838 tips #TT1781
1 The OS is not supported with EPYC 7003 processors.
2 ISG will not sell/preload this OS, but compatibility and cert only.
1 The OS is not supported with EPYC 7003 processors.
Regulatory approvals
The adapters have the following regulatory approvals:
- Safety: CB / cTUVus / CE
- EMC: CE / FCC / VCCI / ICES / RCM / KC
- RoHS: RoHS Compliant
Operating environment
The adapters have the following operating characteristics:
- Typical power consumption (passive cables): 19.3W
- Maximum power available through QSFP56 port: 5W
- Temperature
- Operational: 0°C to 55°C
- Non-operational: -40°C to 70°C
- Humidity: 90% relative humidity
Warranty
One year limited warranty. When installed in a Lenovo server, the adapter assumes the server’s base warranty and any warranty upgrades.
Related publications
For more information, refer to these documents:
- Networking Options for ThinkSystem Servers:
https://lenovopress.com/lp0765-networking-options-for-thinksystem-servers - ServerProven compatibility:
http://www.lenovo.com/us/en/serverproven - Mellanox InfiniBand product page:
https://www.nvidia.com/en-us/networking/infiniband-adapters/ - ConnectX-6 VPI user manual:
https://docs.nvidia.com/networking/display/ConnectX6VPI
Trademarks
Lenovo and the Lenovo logo are trademarks or registered trademarks of Lenovo in the United States, other countries, or both. A current list of Lenovo trademarks is available on the Web at https://www.lenovo.com/us/en/legal/copytrade/.
The following terms are trademarks of Lenovo in the United States, other countries, or both:
Lenovo®
ServerProven®
ThinkSystem®
The following terms are trademarks of other companies:
AMD is a trademark of Advanced Micro Devices, Inc.
Intel® and Xeon® are trademarks of Intel Corporation or its subsidiaries.
Linux® is the trademark of Linus Torvalds in the U.S. and other countries.
Microsoft®, Windows Server®, and Windows® are trademarks of Microsoft Corporation in the United States, other countries, or both.
Other company, product, or service names may be trademarks or service marks of others.
Configure and Buy
Please select a locale
Full Change History
Changes in the August 1, 2024 update:
- Added information about factory preload support for operating systems - Operating system support section
Changes in the October 29, 2023 update:
- Added transceiver and cable support for the Mellanox QSA 100G to 25G Cable Adapter - 25G Cable Adapter transceiver and cable support
Changes in the September 15, 2023 update:
- Withdrawn cables are now hidden; click Show Withdrawn Products to view them - Supported transceivers and cables section
Changes in the May 27, 2023 update:
- Added the following water-cooled adapter:
- ThinkSystem Mellanox ConnectX-6 HDR/200GbE QSFP56 1-Port PCIe 4 VPI Adapter (SharedIO) DWC, BKSK
- Added the following SharedIO cables:
- ThinkSystem SD665 V3 SharedIO Cable, BPZG
- ThinkSystem SD650 V3 NDR Auxiliary Cable, BRL2
Changes in the April 5, 2022 update:
- New section on available management software: NVIDIA Unified Fabric Manager
Changes in the January 16, 2022 update:
- 100Gb transceiver 7G17A03539 also supports 40Gb when installed in a Mellanox adapter. - Supported transceivers and cables section
Changes in the November 2, 2021 update:
- Added additional feature codes for the air-cooled adapter - Part number information section
Changes in the August 24, 2021 update:
- New low-latency optical cables supported - Supported transceivers and cables section:
- 3m Mellanox HDR IB Optical QSFP56 Low Latency Cable, 4Z57A72553
- 5m Mellanox HDR IB Optical QSFP56 Low Latency Cable, 4Z57A72554
- 10m Mellanox HDR IB Optical QSFP56 Low Latency Cable, 4Z57A72555
- 15m Mellanox HDR IB Optical QSFP56 Low Latency Cable, 4Z57A72556
- 20m Mellanox HDR IB Optical QSFP56 Low Latency Cable, 4Z57A72557
- 30m Mellanox HDR IB Optical QSFP56 Low Latency Cable, 4Z57A72558
- 3m Mellanox HDR IB to 2x HDR100 Splitter Optical QSFP56 Low Latency Cable, 4Z57A72561
- 5m Mellanox HDR IB to 2x HDR100 Splitter Optical QSFP56 Low Latency Cable, 4Z57A72562
- 10m Mellanox HDR IB to 2x HDR100 Splitter Optical QSFP56 Low Latency Cable, 4Z57A72563
- 15m Mellanox HDR IB to 2x HDR100 Splitter Optical QSFP56 Low Latency Cable, 4Z57A72564
- 20m Mellanox HDR IB to 2x HDR100 Splitter Optical QSFP56 Low Latency Cable, 4Z57A72565
- 30m Mellanox HDR IB to 2x HDR100 Splitter Optical QSFP56 Low Latency Cable, 4Z57A72566
Changes in the June 8, 2021 update:
- New cables supported - Supported transceivers and cables section:
- 3m Mellanox HDR IB Active Copper QSFP56 Cable, 4X97A12610
- 4m Mellanox HDR IB Active Copper QSFP56 Cable, 4X97A12611
Changes in the April 6, 2021 update:
- New water-cooled adapter feature codes:
- ThinkSystem Mellanox ConnectX-6 HDR/200GbE QSFP56 1-Port PCIe 4 VPI Adapter (SharedIO) DWC, B951
- ThinkSystem Mellanox ConnectX-6 HDR/200GbE QSFP56 1-Port PCIe 4 VPI Adapter DWC, B952
- Added information about SharedIO - SharedIO section
Changes in the February 15, 2021 update:
- The server support tables are now automatically updated - Server support section
Changes in the January 28, 2021 update:
- Added 40Gb QSFP Active Optical Cables - Supported transceivers and cables section
Changes in the January 22, 2021 update:
- The InfiniBand adapter has been renamed to VPI Adapters - Part number information section
- Ethernet functions require firmware version 20.28.1002 or later
Changes in the November 24, 2020 update:
- New QSFP56 200Gb Passive DAC Cables - Supported transceivers and cables section
- Lenovo 1m Passive 200G QSFP56 Ethernet DAC Cable, 4X97A11113
- Lenovo 3m Passive 200G QSFP56 Ethernet DAC Cable, 4X97A12613
Changes in the October 13, 2020 update:
- Added the SR850 V2 and SR860 V2 servers - Server support section
Changes in the May 12, 2020 update:
- Added a note regarding CTO orders - Part number information section
Changes in the May 5, 2020 update:
- Added SR645 and SR665 to the server support table - Server support section
Changes in the January 7, 2020 update:
- Added SR850P to the server support table (no support) - Server support section
Changes in the December 19, 2019 update:
- The Mellanox ConnectX-6 HDR QSFP56 1-port PCIe 4 InfiniBand Adapter is supported in the SR655 and SR635 - Server support section
Changes in the October 31, 2019 update:
- Added OS support table for the ThinkSystem Mellanox HDR/200GbE 2x PCIe Aux Kit - Operating system support section
First published: 23 July 2019
Course Detail
Employees Only Content
The content in this document with a is only visible to employees who are logged in. Logon using your Lenovo ITcode and password via Lenovo single-signon (SSO).
The author of the document has determined that this content is classified as Lenovo Internal and should not be normally be made available to people who are not employees or contractors. This includes partners, customers, and competitors. The reasons may vary and you should reach out to the authors of the document for clarification, if needed. Be cautious about sharing this content with others as it may contain sensitive information.
Any visitor to the Lenovo Press web site who is not logged on will not be able to see this employee-only content. This content is excluded from search engine indexes and will not appear in any search results.
For all users, including logged-in employees, this employee-only content does not appear in the PDF version of this document.
This functionality is cookie based. The web site will normally remember your login state between browser sessions, however, if you clear cookies at the end of a session or work in an Incognito/Private browser window, then you will need to log in each time.
If you have any questions about this feature of the Lenovo Press web, please email David Watts at dwatts@lenovo.com.
