Top
Author
Published
3 Sep 2024Form Number
LP2013PDF size
8 pages, 180 KBSubscribed to LP2013.
Thank you for your feedback.
Abstract
The ThinkSystem Broadcom 57608 2x200/1x400GbE QSFP112 PCIe Ethernet Adapter is a high-performance dual-port 200Gb Ethernet adapter with a PCIe 5.0 x16 host interface that is designed to build highly scalable, feature-rich networking solutions in servers for AI/ML, cloud, high-performance computing, and storage applications. The 57608 Ethernet adapter supports fourth-generation, standards-based RDMA over Converged Ethernet (RoCE) with hardware-based congestion control.
This product guide provides essential presales information to understand the adapter and its key features, specifications, and compatibility. This guide is intended for technical specialists, sales specialists, sales engineers, IT architects, and other IT professionals who want to learn more about the 57608 Ethernet adapter and consider its use in IT solutions.
Introduction
The ThinkSystem Broadcom 57608 2x200/1x400GbE QSFP112 PCIe Ethernet Adapter is a high-performance dual-port 200Gb Ethernet adapter with a PCIe 5.0 x16 host interface that is designed to build highly scalable, feature-rich networking solutions in servers for AI/ML, cloud, high-performance computing, and storage applications.
The adapter uses the Broadcom BCM57608 400GbE MAC controller. Incorporating industry-leading PHY technology, the adapter provides highly efficient network connectivity using 8 lanes of built-in SerDes, each supporting 100/50G PAM-4 and 25G NRZ. The adapter supports fourth-generation, standards-based RDMA over Converged Ethernet (RoCE) with hardware-based congestion control.
The 57608 Ethernet adapter offers two 200Gb Ethernet ports but can also be configured as a 1-port 400Gb adapter with port 1 active and port 2 disabled.
Figure 1. ThinkSystem Broadcom 57608 2x200/1x400GbE QSFP112 PCIe Ethernet Adapter
Did you know?
With its market-leading hardware acceleration technologies, the 57608 Ethernet adapter addresses the performance and service demands of mega-scale data center networks with high throughput and advanced flow processing. Features such as TruFlow™ increase virtual machine density by freeing up CPU cycles. The adapter supports technology-leading security enabling the industry's most secure server platform with secure boot and attestation anchored in Broadcom's silicon Root-of-Trust (RoT).
Part number information
The ordering information is listed in the following table.
| Part number | Feature code | Vendor part | Description |
|---|---|---|---|
| 4XC7A95572 | C4GA | P2200G | ThinkSystem Broadcom 57608 2x200/1x400GbE QSFP112 PCIe Ethernet Adapter |
The adapter, when shipped as a stand-alone option part number, include the following items:
- One Broadcom adapter
- An attached full-height (3U) bracket, and a low-profile (2U) bracket that can be substituted if needed
- Documentation flyer
Supported transceivers and cables
The adapter has two empty QSFP112 cages for connectivity.
The following table lists the supported transceivers.
The following table lists the supported fiber optic cables and Active Optical Cables.
Features
The ThinkSystem Broadcom 57608 2x200/1x400GbE QSFP112 PCIe Ethernet Adapter has the following features:
- Standards-compliant PCIe 5.0 QSFP112 PCIe NIC with line-rate, full-duplex throughput
- Single-port 400/200/100/50/25G
- Dual-port 200/100/50/25G
- High-speed SerDes capable of 100/50G PAM4 and 25G NRZ
- Large-scale RoCE deployment with Switch Aware Rate Adjustment (SARA) and Drop Congestion Notification (DCN)
- Optimized performance with StrataXGSⓇ and StrataDNX™ switches
- Inline encryption engine enables CPU offload and improves application performance
- Peer memory direct for low-latency inter-GPU communication
- On-chip tunneling protocol processing for Geneve, VXLAN, and NVGRE
- Industry's most secure PCIe NIC solution provides unparalleled platform security via silicon Root-of-Trust
- TruFlow™ engine line-rate offload for virtual switch processing
- TruManage™ enhances server manageability and security for data center deployments
- NIC partitioning supporting 16 physical functions (PFs)
- Seamless integration with Broadcom's PCIe Gen 5 PCIe switches for GPU-based AI/ML servers
Specifications
The 57608 Ethernet adapter has the following technical specifications:
- Based on the Broadcom BCM57608-P2200G 2-port controller
- Network Interface:
- 8 SerDes capable of 100/50G PAM4 and 25G NRZ
- Support for up to 2 ports
- QSFP112 support
- 1x 400GbE
- 2x 200/100/50/25GbE
- 400Gb/s total bandwidth
- Auto-negotiation with auto-detect
- IEEE-1588v2
- Host Interface:
- 16 lanes of PCI Express 5.0
- Link rates: 32, 16, 8, 5, 2.5 GT/s
- Lane configuration: x16, x8, x4, x2, and x1
- MSI-X support
- Platform Security:
- HW Secure Boot (RoT)
- Attestation (SPDM)
- OCP Secure Recovery
- Secure Wipe and Restore
- OCP Silver Security Badge (Cert Pending)
- Networking/Virtualizations and Accelerations:
- RoCEv2
- Multi-Queue, NetQueue, and VMQ
- Single Root I/O Virtualization
- VF isolation and protection
- VXLAN, GRE, NVGRE, Geneve, and IP-in-IP
- Tunnel-aware stateless off-loads
- Edge Virtual Bridging (EVB)
- Stateless TCP offloads: IP/TCP/UDP checksum, LSO, LRO, GRO, TSS, RSS, aRFS, Interrupt coalescing
- kTLS hardware offload encryption/decryption support
- QUIC hardware offload encryption/decryption support
- TruFlow Flow Processing:
- Flexible matching key
- NAT and NAPT
- Tunnel encap/decap
- Custom tunnel processing
- Connection tracking
- Flow aging
- Sampling and mirroring
- Rate-limiting and metering
- Flow-based statistics
- Network Traffic Hairpin
- RoCEv2:
- Standards-based
- DCQCN
- Peer Memory Direct
- Smart Congestion Control: DCN and SARA
- Automated Configuration
- Manageability:
- Network Controller Sideband Interface (NC-SI)
- Management Component Transport Protocol (MCTP)
- MCTP over SMBus/I2C
- MCTP over PCIe VDM
- NC-SI over MCTP
- Platform Level Data Model (PLDM): Base, Monitoring/Control & FW update
- PLDM over MCTP
- I2C support for device control and configuration
- Network Boot:
- UEFI PXE boot
- UEFI L2 iSCSI boot
- UEFI support for x86
Server support
The following tables list the ThinkSystem servers that are compatible.
Physical specifications
The PCIe adapter has the following dimensions:
- Length: 167 mm (6.6 in.)
- Height: 64 mm (2.5 in)
Warranty
One-year limited warranty. When installed in a supported server, these adapters assume the server’s base warranty and any warranty upgrade.
Agency approvals
The adapter conforms to the following standards:
- Safety Approvals:
- CB Scheme
- UL 1977 (connector safety)
- UL 796 (PCB wiring safety)
- UL 94 (flammability of parts)
- CSA C22.2 No. 62368-1-19, 3rd Ed
- EMC approvals:
- EN 55032:2015 +AC:2016, Class A
- EN 55024:2010 +A1:2015
- EN 55035
- EN 61000-3-2:2014
- EN 61000-3-3:2013
- CFR47 Part 15 Subpart B Class A
- ICES-003 Class A
- AS/NZS CISPR 32:2015, Class A
- CNS 15936:2016
- CNS 15663
- KN32 Class A
- KN35
- VCCI-CISP 32:2016
Related publications
For more information, see the following resources:
- Networking Options for ThinkSystem Servers
https://lenovopress.com/lp0765-networking-options-for-thinksystem-servers - Lenovo ServerProven compatibility information:
http://serverproven.lenovo.com - Broadcom product web page:
https://www.broadcom.com/products/ethernet-connectivity/network-adapters/p2200g
Trademarks
Lenovo and the Lenovo logo are trademarks or registered trademarks of Lenovo in the United States, other countries, or both. A current list of Lenovo trademarks is available on the Web at https://www.lenovo.com/us/en/legal/copytrade/.
The following terms are trademarks of Lenovo in the United States, other countries, or both:
Lenovo®
ServerProven®
ThinkSystem®
The following terms are trademarks of other companies:
AMD is a trademark of Advanced Micro Devices, Inc.
Intel® is a trademark of Intel Corporation or its subsidiaries.
Other company, product, or service names may be trademarks or service marks of others.
Configure and Buy
Please select a locale
Full Change History
Course Detail
Employees Only Content
The content in this document with a is only visible to employees who are logged in. Logon using your Lenovo ITcode and password via Lenovo single-signon (SSO).
The owner of the document has determined that this content is classified as Lenovo Internal and should not be normally be made available to people who are not employees or contractors. This includes partners, customers, and competitors. The reasons may vary and you should reach out to the authors of the document for clarification, if needed. Be cautious about sharing this content with others as it may contain sensitive information.
Any visitor to the Lenovo Press web site who is not logged on will not be able to see this employee-only content. This content is excluded from search engine indexes and will not appear in any search results.
For all users, including logged-in employees, this employee-only content does not appear in the PDF version of this document.
This functionality is cookie based. The web site will normally remember your login state between browser sessions, however, if you clear cookies at the end of a session or work in an Incognito/Private browser window, then you will need to log in each time.
If you have any questions about this feature of the Lenovo Press web, please email David Watts at dwatts@lenovo.com.
