Top
Abstract
The Lenovo CE0152T Switch is a 1 Gb Ethernet (GbE) switch that delivers a compact, high-density, cost-effective GbE solution for network environments where space and power are at a premium. Featuring a small, 1U footprint, this switch is designed for access-layer deployments in branches, retail and workgroup environments, and network access in larger networks.
This product guide provides essential technical and pre-sales information on the Lenovo CE0152T Switch, its key features and specifications, components and options, and configuration guidelines.
This guide is intended for technical specialists, sales specialists, sales engineers, IT architects, and other IT professionals who want to learn more about the CE0152T Switch and consider its use in IT solutions.
Withdrawn from marketing: This networking switch is now withdrawn from marketing.
Introduction
The Lenovo CE0152T Switch is a 1 Gb Ethernet (GbE) switch that delivers a compact, high-density, cost-effective GbE solution for network environments where space and power are at a premium. Featuring a small, 1U footprint, this switch is designed for access-layer deployments in branches, retail and workgroup environments, and network access in larger networks.
The CE0152T Switch offers 48x 10/100/1000BASE-T ports for server, storage, and network connectivity and 4x 1 GbE SFP uplink ports for connections to higher-layer devices.
The CE0152T Switch supports a wide range of L2 and L3 features that provide performance, availability, security, and manageability for campus networks.
The Lenovo CE0152T Switch is shown in the following figure.
Figure 1. Lenovo CE0152T Switch
Did you know?
The CE0152T Switch is designed to deliver non-blocking, line-rate throughput.
The CE0152T Switch supports the GARP VLAN Registration Protocol (GVRP) protocol for simplifying and automating VLAN configuration.
The CE0152T Switch supports stacking, enabling up to eight interconnected CE0152T Switch devices to be managed as a single logical device.
The CE1052T Switch supports Zero Touch Provisioning, which enables a switch to automatically provision itself using the resources available on the network, without manual intervention.
Key features
The CE0152T Switch is considered particularly suited for the following customers:
- Customers who need economical network connectivity solution for access layer deployments in branch and remote offices, as well as enterprise campus networks.
- Customers who want to use GbE in their infrastructure (servers and networking).
- Customers who are implementing a virtualized environment and require multiple GbE ports.
- Customers who want to reduce total cost of ownership (TCO) and improve performance while maintaining high levels of availability and security.
- Customers who want to implement a converged infrastructure with NAS or iSCSI.
The CE0152T Switch offers the following key features and benefits:
- High performance
The CE0152T Switch provides a combination of non-blocking line-rate GbE switching with as low as 4 microseconds latency and 256 Gbps switching capacity.
- Layer 3 functionality
In addition to Layer 2 switching, the CE0152T Switch includes Layer 3 functionality, which provides security and performance benefits of inter-VLAN routing with support for static routes.
- Quality of Service
The CE0152T Switch supports traffic classification and processing to provide consistent network performance and efficient use of network bandwidth by allocating and scheduling resources based on service levels requirements for different data streams.
- Security
Working as an enforcement point, the CE0152T Switch provides standards-based 802.1x port-level access control for multiple devices per port, as well as Layer 2-4 policy enforcement with Access Control Lists (ACLs).
- Simplified management
To ease deployment, the CE0152T Switch supports the industry-standard Link Layer Discovery Protocol (LLDP) and GARP VLAN Registration Protocol (GVRP) protocols, enabling the switches to automatically discover Ethernet-enabled devices and automate VLAN configuration.
- Stacking
The CE0152T Switch supports stacking, enabling up to eight interconnected CE0152T Switch devices to be managed as a single logical device, delivering a scalable, pay-as-you-grow solution for expanding network environments.
- Zero-touch provisioning
The CE1052T supports CPE WAN Management Protocol (CWMP) for zero-touch provisioning (ZTP). ZTP enables a switch to automatically provision itself using the resources available on the network, without manual intervention. ZTP automatically handles the process of upgrading the switch software image and installing configuration files.
Components and connectors
The front panel of the CE0152T Switch is shown in the following figure.
Figure 2. Front panel of the CE0152T Switch
The front panel of the CE0152T Switch contains the following components:
- 48x 1000BASE-T Ethernet ports for 10/100/1000 Mbps connections.
- 4x SFP ports for 1 GbE transceivers: 1000BASE-T, SX, or LX.
- 1x RJ-45 RS-232 console port for configuring the switch.
- LEDs that display the status of the switch and the network.
- Reset button.
There is also a fixed fan on the left side of the switch.
The rear panel of the CE0152T Switch is shown in the following figure.
Figure 3. Rear panel of the CE0152T Switch
The rear panel of the CE0152T Switch contains the following components:
- AC / HVDC power connector (IEC 320-C14).
- Grounding pole.
System specifications
The following table lists system specifications for the CE0152T Switch.
| Attribute | Specification |
|---|---|
| Form factor | 1U rack mount |
| Ports |
|
| Media types | 1 Gb Ethernet fixed ports (1000BASE-T):
|
| Port speeds |
|
| Data traffic types | Unicast, multicast, broadcast. |
| Software features | Layer 2 switching, Layer 3 switching, virtual local area networks (VLANs), VLAN tagging, Q-in-Q VLAN tunneling, spanning tree protocol (STP), link aggregation groups (LAGs), L2 link failure detection, IPv4/IPv6 management, IPv4/IPv6 static routing, stacking, zero-touch provisioning (CWMP). |
| Performance | Non-blocking architecture with wire-speed forwarding of traffic:
|
| Scalability |
|
| Cooling | One variable-speed fixed system fan. Right side-to-left side airflow. |
| Power supply | One fixed 100 - 240 V AC / 192 - 290 V HVDC power supply with IEC 320-C14 connector. |
| Hot-swap parts | SFP transceivers. |
| Management ports | 1x RS-232 port (RJ-45). |
| Management interfaces | CLI; Web-based GUI; SNMP v1, v2c, and v3. |
| Security features | Secure Shell (SSH); HTTPS; user level security, Role-based Access Control (RBAC); RADIUS and TACACS+ authentication; access control lists (ACLs); port-based network access control (IEEE 802.1x). |
| Warranty | 1-year hardware warranty with return-to-factory switch replacement. |
| Dimensions | Height: 44 mm (1.7 in.); width: 440 mm (17.4 in.); depth: 260 mm (12.2 in.) |
| Weight | 4 kg. |
Models
The following table lists the Lenovo CE0152T Switch models.
Product availability: The Lenovo CE0152T Switch is available only in China.
| Description | Part number | Machine Type | Feature code |
|---|---|---|---|
| Lenovo CE0152T Switch | 7Y060021CN | 7Y06 | B13G |
The CE0152T Switch models ship with the following items:
- Two mounting brackets
- Documentation package
Configuration notes:
- The power cable is not included and must be ordered together with the switch (see Power supplies and cables for details).
- SFP transceivers and cables are not included and should be ordered for the switch, if required (see Transceivers and cables for details).
Transceivers and cables
With the flexibility of the CE0152T Switch, customers can choose the following connectivity technologies:
- Fixed 10/100/1000 Mb Ethernet ports: Customers can use RJ-45 UTP cables for distances up to 100 meters.
- SFP ports:
- For distances up to 100 meters, customers can use the 1000BASE-T transceivers with RJ-45 UTP cables.
- For distances up to 550 meters, customers can use the 1000BASE-SX transceivers with 50 µ OM2 multimode fiber optic (MMF) cables.
- For distances up to 10 kilometers, customers can use the 1000BASE-LX transceivers with 9 µ single-mode fiber optic (SMF) cables.
The supported SFP transceiver and cable options are listed in the following table.
| Description | Part number | Feature code | Maximum quantity supported |
|---|---|---|---|
| SFP transceivers - 1 GbE | |||
| Lenovo 1000BASE-T (RJ-45) SFP Transceiver (no 10/100 Mbps support) | 00FE333 | A5DL | 4 |
| Lenovo RJ45 1Gbps SFP Transceiver (no 10/100 Mbps support) | 00AY240 | A4M8 | 4 |
| Lenovo 1000BASE-SX SFP Transceiver | 81Y1622 | 3269 | 4 |
| Lenovo 1000BASE-LX SFP Transceiver | 90Y9424 | A1PN | 4 |
| Optical cables for 1 GbE SFP SX transceivers | |||
| Lenovo 1m LC-LC OM3 MMF Cable | 00MN502 | ASR6 | 4 |
| Lenovo 3m LC-LC OM3 MMF Cable | 00MN505 | ASR7 | 4 |
| Lenovo 5m LC-LC OM3 MMF Cable | 00MN508 | ASR8 | 4 |
| Lenovo 10m LC-LC OM3 MMF Cable | 00MN511 | ASR9 | 4 |
| Lenovo 15m LC-LC OM3 MMF Cable | 00MN514 | ASRA | 4 |
| Lenovo 25m LC-LC OM3 MMF Cable | 00MN517 | ASRB | 4 |
| Lenovo 30m LC-LC OM3 MMF Cable | 00MN520 | ASRC | 4 |
The network cables that can be used with the CE0152T Switch are listed in the following table.
| Transceiver | Type | Cable | Connector |
|---|---|---|---|
| 1 Gb Ethernet | |||
| RJ-45 ports (fixed) 1Gb RJ-45 SFP (00FE333, 00AY240) |
1000BASE-T | UTP Category 5, 5E, or 6 up to 100 meters. | RJ-45 |
| 1Gb SX SFP (81Y1622) | 1000BASE-SX | Lenovo fiber optic cables up to 30 m (see Table 3); 50/125 µ OM2 multimode fiber optic cable up to 550 m. |
LC |
| 1Gb LX SFP (90Y9424) | 1000BASE-LX | 9/125 µ single-mode fiber optic cable up to 10 km. | LC |
| Management ports | |||
| RS-232 serial console port | RS-232 | DB-9-to-RJ-45 console cable (purchased separately) | RJ-45 |
Software features
The CE0152T Switch has the following software features:
- Scalability and performance:
- Media access control (MAC) address learning
- Static and LACP (IEEE 802.3ad) link aggregation groups (LAGs)
- Broadcast storm control
- IGMP snooping for limit flooding of IP multicast traffic
- IGMP filtering to control multicast traffic for hosts participating in multicast groups
- Configurable traffic distribution schemes over LAGs based on source/destination IP or MAC
- Availability and redundancy:
- IEEE 802.1D STP for providing L2 redundancy
- IEEE 802.1s Multiple STP (MSTP) for topology optimization
- IEEE 802.1w Rapid STP (RSTP) (rapid convergence for delay-sensitive traffic such as voice)
- Rapid Link Detection Protocol (RLDP) for L2 link failure detection
- VLAN support:
- Port-based and protocol-based VLANs
- Up to 4094 VLANs supported per switch
- 802.1Q VLAN tagging support on all ports
- 802.1Q-in-Q VLAN tunneling
- 802.1x with dynamic VLAN assignment
- Private VLANs
- Stacking:
- Up to 8 switches in a stack
- Single IP management
- Less than 100 milliseconds failover time in case of a member switch failure
- Line and ring stacking topologies
- Link aggregation across member devices
- Multi-Active Detection (MAD) via bi-directional forwarding detection (BFD) or link aggregation
- Security:
- MAC-based and IP-based access control lists (ACLs)
- 802.1x port-based network access control
- Multiple local user IDs and passwords
- User access control
- Radius and TACACS+ authentication and authorization
- Protection from Denial of Service (DoS) attacks
- DHCP snooping (IPv4/IPv6)
- Quality of Service (QoS):
- IEEE 802.1p, IP ToS/DSCP, MAC/IP, and port traffic classification and processing
- Traffic shaping and re-marking based on defined policies
- Eight priority queues per port for processing qualified traffic
- Strict-Priority (SP) scheduling
- Weighted Round Robin (WRR) scheduling
- Weighted Fair Queueing (WFQ) scheduling
- IPv4/IPv6 ACL metering
- IP v4 Layer 3 functions:
- Host management
- IP filtering with ACLs
- Routing protocols (RIP and OSPF)
- Static routes
- DHCP server, client and relay operations
- IGMP v1/v2 snooping
- IP v6 Layer 3 functions:
- IPv6 host management
- IPv6 filtering with ACLs
- Static routes
- DHCPv6 server, client and relay operations
- Manageability:
- Command Line Interface (CLI)
- Serial console
- Telnet
- SSH v1 and v2
- Web-based management graphical user interface (GUI): HTTP/HTTPS
- Simple Network Management Protocol (SNMP v1, v2c, and v3)
- Firmware image and configuration file management: TFTP
- Link Layer Discovery Protocol (LLDP) for discovering network devices
- GARP VLAN Registration Protocol (GVRP) for automated VLAN configuration
- CPE WAN Management Protocol (CWMP) for auto-configuration and dynamic service provisioning
- Network Time Protocol (NTP) / Simple NTP (SNTP) for switch clock synchronization
- Command Line Interface (CLI)
- Monitoring:
- Status LEDs for port status and switch status indication
- Remote Monitoring (RMON) agent to collect statistics and proactively monitor switch performance
- Switched Port Analyzer (SPAN) / Remote SPAN (RSPAN) for monitoring network traffic
- Syslog feature for change tracking and remote logging
Ethernet standards
The CE0152T Switch supports the following Ethernet standards:
- IEEE 802.1AB: Link Layer Discovery Protocol (LLDP)
- IEEE 802.1D Spanning Tree Protocol (STP)
- IEEE 802.1s Multiple STP (MSTP)
- IEEE 802.1w Rapid STP (RSTP)
- IEEE 802.1p Class of Service (CoS) prioritization
- IEEE 802.1Q VLAN tagging
- IEEE 802.1Q-in-Q VLAN tunneling
- IEEE 802.1x port-based authentication
- IEEE 802.3 10BASE-T Ethernet
- IEEE 802.3u 100BASE-TX copper Fast Ethernet
- IEEE 802.3ab 1000BASE-T copper twisted-pair Gigabit Ethernet
- IEEE 802.3z 1000BASE-SX short range fiber optics Gigabit Ethernet
- IEEE 802.3z 1000BASE-LX long range fiber optics Gigabit Ethernet
- IEEE 802.3x Full-duplex Flow Control
- IEEE 802.3az Energy Efficient Ethernet (EEE)
- IEEE 802.3ad Link Aggregation Control Protocol (LACP)
Power supplies and cables
The CE0152T Switch has one fixed AC / HVDC power supply with an IEC 320-C14 connector.
The CE0152T Switch ships without any power cables. The part numbers and feature codes to order the AC power cables are listed in the following table (one cable is required per switch).
| Description | Part number | Feature code |
|---|---|---|
| 4.3m, 10A/100-250V, C13 to IEC 320-C14 Rack Power Cable | 39Y7932 | 6263 |
Installation
The CE0152T Switch can be mounted on a wall or in 2-post or 4-post rack cabinets by using the two mounting brackets that come with the switch.
Physical specifications
The CE0152T Switch has the following approximate dimensions and weight:
- Height: 44 mm
- Width: 440 mm
- Depth: 260 mm
- Weight: 4 kg
Operating environment
The CE0152T Switch is supported in the following environment:
- Operating temperature: 0° to 50° C
- Storage temperature: -40° to 70° C
- Operating altitude: up to 3000 m
- Relative humidity operating: 10% to 90%
- Relative humidity non-operating: 5% to 90%
- Electrical:
- AC input:
- 100 - 240 V AC (nominal); 50 Hz or 60 Hz
- AC rated current: 1.5 A
- HVDC input:
- 192 - 290 V HVDC
- HVDC rated current: 0.17 A - 0.3 A
- AC input:
- Power consumption:
- Maximum: 34.5 W
- Idle: 25.7 W
- Heat dissipation:
- Maximum: 118 BTU/hour
- Idle: 88 BTU/hour
Warranty
The CE0152T Switch has a 1-year hardware warranty that provides return-to-factory switch replacement.
Regulatory compliance
The CE0152T Switch conforms to the following regulations:
- China CCC GB4943, GB9254 Class A, GB17625.1
- China CECP
- China MII
- China RoHS
- China REACH
- China WEEE
Network connectivity
The following table lists the network switches that are offered by Lenovo that can be used with the CE0152T Switch in IT solutions.
| Description | Part number |
|---|---|
| 1 Gb Ethernet switches | |
| Lenovo CE0128T Switch | 7Y050011CN |
| Lenovo CE0128P Switch | 7Y050012CN |
| Lenovo RackSwitch G7028 (Rear to Front) | 7159BAX |
| Lenovo RackSwitch G7052 (Rear to Front) | 7159CAX |
| Lenovo RackSwitch G8052 (Rear to Front) | 7159G52 |
| Juniper EX2300-C PoE Switch | 7165H1X |
| Juniper EX2300-24p PoE Switch | 7165H2X |
| 10 Gb Ethernet switches | |
| Lenovo ThinkSystem NE1032 RackSwitch (Rear to Front) | 7159A1X |
| Lenovo ThinkSystem NE1032T RackSwitch (Rear to Front) | 7159B1X |
| Lenovo ThinkSystem NE1072T RackSwitch (Rear to Front) | 7159C1X |
| Lenovo RackSwitch G8124E (Rear to Front) | 7159BR6 |
| Lenovo RackSwitch G8264 (Rear to Front) | 7159G64 |
| Lenovo RackSwitch G8264CS (Rear to Front) | 7159DRX |
| Lenovo RackSwitch G8272 (Rear to Front) | 7159CRW |
| Lenovo RackSwitch G8296 (Rear to Front) | 7159GR6 |
For more information, see the list of Product Guides in the Top-of-rack Switches category:
http://lenovopress.com/servers/options/switches#rt=product-guide
Storage connectivity
The following table lists the storage systems that Lenovo offers in China that can be used with the CE0152T Switch for external 1 GbE NAS or 1 Gb iSCSI SAN storage connectivity.
| Description | Part number |
|---|---|
| Lenovo ThinkSystem DS Series Storage (1 Gb iSCSI connectivity) | |
| Lenovo ThinkSystem DS2200 LFF FC/iSCSI Dual Controller Unit (Simplified Chinese documentation) | 4599A3C |
| Lenovo ThinkSystem DS2200 SFF FC/iSCSI Dual Controller Unit (Simplified Chinese documentation) | 4599A1C |
| Lenovo ThinkSystem DS4200 LFF FC/iSCSI Dual Controller Unit (Simplified Chinese documentation) | 4617A3C |
| Lenovo ThinkSystem DS4200 SFF FC/iSCSI Dual Controller Unit (Simplified Chinese documentation) | 4617A1C |
| Lenovo ThinkSystem DS6200 SFF FC/iSCSI Dual Controller Unit (Simplified Chinese documentation) | 4619A1C |
| Lenovo Storage V Series (1 Gb iSCSI connectivity) | |
| Lenovo Storage V3700 V2 LFF Control Enclosure | 6535C1D |
| Lenovo Storage V3700 V2 LFF Control Enclosure (TopSeller) | 6535EC1 |
| Lenovo Storage V3700 V2 SFF Control Enclosure | 6535C2D |
| Lenovo Storage V3700 V2 SFF Control Enclosure (TopSeller) | 6535EC2 |
| Lenovo Storage V3700 V2 XP LFF Control Enclosure | 6535C3D |
| Lenovo Storage V3700 V2 XP LFF Control Enclosure (TopSeller) | 6535EC3 |
| Lenovo Storage V3700 V2 XP SFF Control Enclosure | 6535C4D |
| Lenovo Storage V3700 V2 XP SFF Control Enclosure (TopSeller) | 6535EC4 |
| Lenovo Storage V5030 LFF Control Enclosure 3Yr S&S | 6536C12 |
| Lenovo Storage V5030 LFF Control Enclosure 5Yr S&S | 6536C32 |
| Lenovo Storage V5030 SFF Control Enclosure 3Yr S&S | 6536C22 |
| Lenovo Storage V5030 SFF Control Enclosure 5Yr S&S | 6536C42 |
| Lenovo Storage V5030F SFF Control Enclosure 3Yr S&S | 6536B1F |
| Lenovo Storage V5030F SFF Control Enclosure 5Yr S&S | 6536B2F |
| Lenovo Storage V7000 SFF Control Enclosure 3Yr S&S PRC | 6538R11^ |
| Lenovo Storage V7000 SFF Control Enclosure 5Yr S&S PRC | 6538R21^ |
| Lenovo Storage V7000F SFF Control Enclosure 3Yr S&S PRC | 6538R1G^ |
| Lenovo Storage V7000F SFF Control Enclosure 5Yr S&S PRC | 6538R2G^ |
| IBM Storwize for Lenovo (1 Gb iSCSI connectivity) | |
| IBM Storwize V3500 3.5-inch Dual Control Storage Controller Unit | 6096CU2 |
| IBM Storwize V3500 2.5-inch Dual Control Storage Controller Unit | 6096CU3 |
| IBM Storwize V7000 SFF Control Enclosure, 3YR SWMA | 6195C32 |
| IBM Storwize V7000 SFF Control Enclosure, 5YR SWMA | 6195C52 |
| Lenovo Storage DX8200N Series (1 GbE NAS, 1 Gb iSCSI connectivity) | |
| Lenovo Storage DX8200N with 1x N2226 HBA (Requires a supported external drive enclosure) | 5128C1C |
| Lenovo Storage DX8200N with 2x N2226 HBAs (Requires a supported external drive enclosure) | 5128C2C |
| Lenovo Storage DX8200C Series (1 GbE S3 cloud storage) | |
| Lenovo Storage DX8200C 56TB (14x 4TB HDDs) with Cloudian HyperStore - 3yr HW/SW S&S | 5120D1C |
| Lenovo Storage DX8200C 84TB (14x 6TB HDDs) with Cloudian HyperStore - 3yr HW/SW S&S | 5120D2C |
| Lenovo Storage DX8200C 112TB (14x 8TB HDDs) with Cloudian HyperStore - 3yr HW/SW S&S | 5120D3C |
| Lenovo Storage DX8200C 140TB (14x 10TB HDDs) with Cloudian HyperStore - 3yr HW/SW S&S | 5120D4C |
For more information, see the list of Product Guides in the following categories:
- Lenovo DS Series and V Series storage:
http://lenovopress.com/storage/san/lenovo#rt=product-guide - IBM Storwize for Lenovo storage:
http://lenovopress.com/storage/san/ibm#rt=product-guide - Lenovo Cloud storage:
http://lenovopress.com/storage/cloud#rt=product-guide - Lenovo NAS storage:
http://lenovopress.com/storage/nas#rt=product-guide
Rack cabinets
The following table lists the rack cabinets that are offered by Lenovo that can be used with the CE0152T Switch in IT solutions.
| Description | Part number |
|---|---|
| 25U S2 Standard Rack (1000 mm deep; 2 sidewall compartments) | 93072RX |
| 25U Static S2 Standard Rack (1000 mm deep; 2 sidewall compartments) | 93072PX |
| 42U S2 Standard Rack (1000 mm deep; 6 sidewall compartments) | 93074RX |
| 42U 1100mm Enterprise V2 Dynamic Rack (6 sidewall compartments) | 93634PX |
| 42U 1100mm Enterprise V2 Dynamic Expansion Rack (6 sidewall compartments) | 93634EX |
| 42U 1200mm Deep Dynamic Rack (6 sidewall compartments) | 93604PX |
| 42U 1200mm Deep Static Rack (6 sidewall compartments) | 93614PX |
| 42U Enterprise Rack (1105 mm deep; 4 sidewall compartments) | 93084PX |
| 42U Enterprise Expansion Rack (1105 mm deep; 4 sidewall compartments) | 93084EX |
For more information, see the list of Product Guides in the Rack cabinets category:
https://lenovopress.com/servers/options/racks#rt=product-guide
Power distribution units
The following table lists the power distribution units (PDUs) that are offered by Lenovo that can be used with the CE0152T Switch in IT solutions.
| Description | Part number |
|---|---|
| 0U Basic PDUs | |
| 0U 36 C13/6 C19 32A/200-240V 1 Phase PDU with IEC60309 332P6 line cord | 00YJ777 |
| 0U 21 C13/12 C19 32A/200-240V/346-415V 3 Phase PDU with IEC60309 532P6 line cord | 00YJ778 |
| 0U 21 C13/12 C19 48A/200-240V 3 Phase PDU with IEC60309 460P9 line cord | 00YJ779 |
| Switched and Monitored PDUs | |
| 0U 20 C13/4 C19 Switched and Monitored 32A/200-240V/1Ph PDU w/ IEC60309 332P6 line cord | 00YJ780 |
| 0U 18 C13/6 C19 Switched / Monitored 32A/200-240V/346-415V/3Ph PDU w/ IEC60309 532P6 cord | 00YJ782 |
| 0U 12 C13/12 C19 Switched and Monitored 48A/200-240V/3Ph PDU w/ IEC60309 460P9 line cord | 00YJ783 |
| 1U 9 C19/3 C13 Switched and Monitored DPI PDU (without line cord) | 46M4002 |
| 1U 9 C19/3 C13 Switched and Monitored 60A 3Ph PDU with IEC 309 3P+Gnd cord | 46M4003 |
| 1U 12 C13 Switched and Monitored DPI PDU (without line cord) | 46M4004 |
| 1U 12 C13 Switched and Monitored 60A 3 Phase PDU with IEC 309 3P+Gnd line cord | 46M4005 |
| Ultra Density Enterprise PDUs (9x IEC 320 C13 + 3x IEC 320 C19 outlets) | |
| Ultra Density Enterprise C19/C13 PDU Module (without line cord) | 71762NX |
| Ultra Density Enterprise C19/C13 PDU 60A/208V/3ph with IEC 309 3P+Gnd line cord | 71763NU |
| C13 Enterprise PDUs (12x IEC 320 C13 outlets) | |
| DPI C13 Enterprise PDU+ (without line cord) | 39M2816 |
| DPI Single Phase C13 Enterprise PDU (without line cord) | 39Y8941 |
| C19 Enterprise PDUs (6x IEC 320 C19 outlets) | |
| DPI Single Phase C19 Enterprise PDU (without line cord) | 39Y8948 |
| DPI 60A 3 Phase C19 Enterprise PDU with IEC 309 3P+G (208 V) fixed line cord | 39Y8923 |
| Front-end PDUs (3x IEC 320 C19 outlets) | |
| DPI 32amp/250V Front-end PDU with IEC 309 2P+Gnd line cord | 39Y8934 |
| DPI 60amp/250V Front-end PDU with IEC 309 2P+Gnd line cord | 39Y8940 |
| DPI 63amp/250V Front-end PDU with IEC 309 2P+Gnd line cord | 39Y8935 |
| Universal PDUs (7x IEC 320 C13 outlets) | |
| DPI Universal 7 C13 PDU (with 2 m IEC 320-C19 to C20 rack power cord) | 00YE443 |
| Line cords for PDUs that ship without a line cord | |
| DPI 32a Line Cord (IEC 309 P+N+G) | 40K9612 |
| DPI 32a Line Cord (IEC 309 3P+N+G) | 40K9611 |
| DPI 60a Cord (IEC 309 2P+G) | 40K9615 |
| DPI 63a Cord (IEC 309 P+N+G) | 40K9613 |
For more information, see the list of Product Guides in the PDU category:
https://lenovopress.com/servers/options/pdu#rt=product-guide
Uninterruptible power supply units
The following table lists the uninterruptible power supply (UPS) units that are offered by Lenovo that can be used with the CE0152T Switch in IT solutions.
| Description | Part number |
|---|---|
| RT1.5kVA 2U Rack or Tower UPS (200-240VAC) (8x IEC 320 C13 10A outlets) | 55941KX |
| RT2.2kVA 2U Rack or Tower UPS (200-240VAC) (8x IEC 320 C13 10A, 1x IEC 320 C19 16A outlets) | 55942KX |
| RT3kVA 2U Rack or Tower UPS (200-240VAC) (8x IEC 320 C13 10A, 1x IEC 320 C19 16A outlets) | 55943KX |
| RT5kVA 3U Rack or Tower UPS (200-240VAC) (8x IEC 320 C13 10A, 2x IEC 320 C19 16A outlets) | 55945KX |
| RT6kVA 3U Rack or Tower UPS (200-240VAC) (8x IEC 320 C13 10A, 2x IEC 320 C19 16A outlets) | 55946KX |
| RT8kVA 6U Rack or Tower UPS (200-240VAC) (4x IEC 320-C19 16A outlets) | 55948KX |
| RT11kVA 6U Rack or Tower UPS (200-240VAC) (4x IEC 320-C19 16A outlets) | 55949KX |
| RT8kVA 6U 3:1 Phase Rack or Tower UPS (380-415VAC) (4x IEC 320-C19 16A outlets) | 55948PX |
| RT11kVA 6U 3:1 Phase Rack or Tower UPS (380-415VAC) (4x IEC 320-C19 16A outlets) | 55949PX |
For more information, see the list of Product Guides in the Uninterruptible Power Supply Units category:
http://lenovopress.com/servers/options/ups#rt=product-guide
Lenovo Financial Services
Lenovo Financial Services reinforces Lenovo’s commitment to deliver pioneering products and services that are recognized for their quality, excellence, and trustworthiness. Lenovo Financial Services offers financing solutions and services that complement your technology solution anywhere in the world.
We are dedicated to delivering a positive finance experience for customers like you who want to maximize your purchase power by obtaining the technology you need today, protect against technology obsolescence, and preserve your capital for other uses.
We work with businesses, non-profit organizations, governments and educational institutions to finance their entire technology solution. We focus on making it easy to do business with us. Our highly experienced team of finance professionals operates in a work culture that emphasizes the importance of providing outstanding customer service. Our systems, processes and flexible policies support our goal of providing customers with a positive experience.
We finance your entire solution. Unlike others, we allow you to bundle everything you need from hardware and software to service contracts, installation costs, training fees, and sales tax. If you decide weeks or months later to add to your solution, we can consolidate everything into a single invoice.
Our Premier Client services provide large accounts with special handling services to ensure these complex transactions are serviced properly. As a premier client, you have a dedicated finance specialist who manages your account through its life, from first invoice through asset return or purchase. This specialist develops an in-depth understanding of your invoice and payment requirements. For you, this dedication provides a high-quality, easy, and positive financing experience.
For your region specific offers please ask your Lenovo sales representative or your technology provider about the use of Lenovo Financial Services. For more information, see the following Lenovo website:
http://www.lenovofs.com
Related product families
Product families related to this document are the following:
Trademarks
Lenovo and the Lenovo logo are trademarks or registered trademarks of Lenovo in the United States, other countries, or both. A current list of Lenovo trademarks is available on the Web at https://www.lenovo.com/us/en/legal/copytrade/.
The following terms are trademarks of Lenovo in the United States, other countries, or both:
Lenovo®
ThinkSystem®
Other company, product, or service names may be trademarks or service marks of others.
